BATTERY CAPACITY TESTER
HTC BM-36 BATTERY TESTER
SPECIFICATIONS
- Screen : 2.4″ Colour Screen
- Application : 12V/24V Battery/ Electric Vehicle
- Battery Lifespan : Show as Percentage
- Voltage/CCA/Internal resistance : Yes
- Start the test : Yes
- Load Test : Yes
- Charging test : Yes
- Kelvin Probe test : Yes
- Colour Screen operating system : Yes
- Protection input for anti-polarity/Overvoltage : Yes
- Built in Li-ion Battery : Yes
FEATURES
- 2.4” Inches Colour Screen
- Test the Performance of 12V/24V Lead-Acid Battery
- Battery Test Only Measure the Battery Life
Compare
The instrument is used to analyse and test the performance of 12V/24V lead-acid battery. It can test and analyse the performance of the battery during the vehicle starting process, the generator charging process and the static state.
Based on 0 reviews
Be the first to review “HTC BM-36 BATTERY TESTER”
Related products
-
-
BATTERY CAPACITY TESTER
MECO VBSM6246P VEHICLE BATTERY SYSTEM
SPECIFICATIONS :
- RATED CAPACITY : 4 – 400 Ah
- DIMENSION : 235x90x50 mm
FEATURES :
- Key Parameters Measured for Diagnosis of Vehicle Battery & Electrical System
- Display of Battery Condition [Good / Ok / Pay Attention / Replace]
- Overload Protection to ensure Operator Safety
- Loose Lead DetectionReverse Polarity Protectionl
- Internal Unit Conversion CCA / IEC / EN / DIN
- Battery Recharge Indicator, Detects and Displays Bad Cell, Overload Protection of Input Voltage
SKU: n/a -
BATTERY CAPACITY TESTER
HIOKI BATTERY TESTER BT3554-51
SPECIFICATIONS
- Resistance measurement range : 3 mΩ (max. display 3.100 mΩ, resolution 1 μΩ) to 3 Ω (max. display 3.100 Ω, resolution 1 mΩ), 4 ranges
- Accuracy : ±0.8 % rdg ±6 dgt (3 mΩ range: ±1.0 % rdg ±8 dgt)
- Testing source frequency : 1 kHz ±30 Hz
- Voltage measurement range : ± 6 V (max. display ±6.000 V, resolution: 1 mV) to ± 60 V (max. display ±60.00 V, resolution: 10 mV), 2 ranges
- Temperature measurement accuracy : -10°C to 60°C (14°F to 140°F), Maximum display: 60.0°C (140.0°F), Resolution 0.1°C (0.1°F)
- Absolute max. input voltage : 60 V DC max. (No AC input)
- Measurement time : 100 ms
- Response time : Approx. 1.6 sec.
- Power supply : LR6 (AA) Alkaline dry battery ×8
- Continuous operating time: About 8.3 hr. (without Z3210 installed), About 8.2 hr. (with Z3210 installed and wireless communications active)
- Communication interface : USB Bluetooth® wireless communications (when Z3210 installed)
FEATURES
- Battery measurement can be performed while the battery is connected to its host device, without taking it offline
- Measure and save data in as fast as 2 seconds, a 60% improvement from the legacy 3554
- Instantaneously diagnose battery degradation (PASS, WARNING, FAIL) by measuring internal resistance and voltage (*1)
- Noise reduction technology improves noise resistance
- Screen and audio (*2) guidance simplifies measurement
- Measurement data is linked to site information and saved, reducing management man-hours
- Easily transfer measurement data to your smartphone or tablet by using our free app GENNECT Cross (*3) or to an Excel® file. (Wireless Adapter Z3210 is necessary)
- New protector delivers better ergonomic hold and durability in the field.
SKU: n/a -
BATTERY CAPACITY TESTER
MECO BM 63 BATTERY TESTER
SPECIFICATIONS :
- DC VOLTAGE RANGE : 2 to 12 V
- BATTERY CAPACITY : 4-500 Ah
- DIMENSIONS : 220x120x70 mm
- DISPLAY : Analog
FEATURES :
- Rated Voltage of Battery to be Tested: 2, 6, 12V DC.
- Rated Capacity of Battery to be Tested: 4-500 Ah.
- Measuring Time: <3 Sec.
SKU: n/a
There are no reviews yet.