Product Carousel Tabs
PROBES
HIOKI P2000 DC High Voltage Pr…
SPECIFICATIONS
Maximum Input Voltage : DC 2000 V
Maximum rated line-to-ground voltage
1000 V (Measurement Category IV), Anticipated transient overvoltage 12000 V
2000 V (Measurement Category III), Anticipated transient overvoltage 15000 V
1000 V (Measurement Category IV), Anticipated transient overvoltage 12000 V
2000 V (Measurement Category III), Anticipated transient overvoltage 15000 V
Input Resistance : 20 MΩ ±5.0% (between INPUT H and INPUT L, when OUTPUT terminal is open)
Overload Protection :
2200 V DC/2200 V AC (applied for 1 minute) (between INPUT H and INPUT L)
600 V DC/600 V AC (applied for 1 minute) (between OUTPUT H and OUTPUT L)
2200 V DC/2200 V AC (applied for 1 minute) (between INPUT H and INPUT L)
600 V DC/600 V AC (applied for 1 minute) (between OUTPUT H and OUTPUT L)
Output Terminal : 4 mm banana terminal
Operating Temperature Range : -25°C to 65°C (-13°F to 149°F)
Operating Humidity Range : −25°C to 40°C (−13°F to 104°F): 80% RH or less (non-condensing)
40°C to 65°C (104°F to 149°F): Linearly reduces from 80% RH or less at 40°C (104°F) to 25% RH or less at 65°C (149°F) (non-condensing)
40°C to 65°C (104°F to 149°F): Linearly reduces from 80% RH or less at 40°C (104°F) to 25% RH or less at 65°C (149°F) (non-condensing)
Storage temperature and humidity range : -30°C to 70°C (-22°F to 158°F) 90% RH or less (non-condensing)
Standards : EN 61010
Included Accessories : Connection Cable Set L4943 ×1, Strap with buckle ×2, Strap ×1, Carrying Case C0205 ×1, Instruction Manual ×1, Operating Precautions ×1
FEATURES
Enables high voltage measurement up to CAT Ⅲ 2000 V
Safely measure solar installations like the mega-solar without interrupting the grid
Connects to compatible Hioki clamp meters and digital multimeters (DMMs)
ACCURACY FOR COMPATIBLE INSTRUMENTS
DT-4261 :
Range 600.0 V: Combined accuracy ±0.5% rdg ±0.2 V
Range 2000 V: Combined accuracy ±0.5% rdg ±5 V
Range 600.0 V: Combined accuracy ±0.5% rdg ±0.2 V
Range 2000 V: Combined accuracy ±0.5% rdg ±5 V
CM4141-50 ; CM4371-50 ; CM4373-50 ; CM4375-50 :
Range 600.0 V: Combined accuracy ±1.0% rdg ±0.3 V
Range 2000 V: Combined accuracy ±1.0% rdg ±3 V
Range 600.0 V: Combined accuracy ±1.0% rdg ±0.3 V
Range 2000 V: Combined accuracy ±1.0% rdg ±3 V
DT-4282 ; DT-4281 :
Range 60.000 V: Combined accuracy ±0.8% rdg ±0.002 V (output rate 1/10)
Range 600.00 V: Combined accuracy ±0.8% rdg ±0.02 V (output rate 1/10)
Range 60.000 V: Combined accuracy ±0.8% rdg ±0.002 V (output rate 1/10)
Range 600.00 V: Combined accuracy ±0.8% rdg ±0.02 V (output rate 1/10)
DT-4252 ; DT-4253 :
Range 60.00 V: Combined accuracy ±1.2% rdg ±0.05 V (output rate 1/10)
Range 600.0 V: Combined accuracy ±1.2% rdg ±0.5 V (output rate 1/10)
Range 60.00 V: Combined accuracy ±1.2% rdg ±0.05 V (output rate 1/10)
Range 600.0 V: Combined accuracy ±1.2% rdg ±0.5 V (output rate 1/10)
DT-4255 ; DT-4256 :
Range 60.00 V: Combined accuracy ±1.2% rdg ±0.03 V (output rate 1/10)
Range 600.0 V: Combined accuracy ±1.2% rdg ±0.3 V (output rate 1/10)
Range 60.00 V: Combined accuracy ±1.2% rdg ±0.03 V (output rate 1/10)
Range 600.0 V: Combined accuracy ±1.2% rdg ±0.3 V (output rate 1/10)
SKU: n/a
POWER SUPPLY
BEETECH 3005 30V DC REGULATED …
SPECIFICATION
TECHNICAL SPECIFICATION
Voltage output range : 0 – 30V
Current output range : 0 – 5A
Current and voltage display model : A means pointer display, D means LED display
Display precision Pointer display : ± 2.5%
Digital display : ± 1% ± 1 word
PARAMETER SPECIFICATION
Input voltage: AC 220V ± 10% (switch to choose) 50/60Hz
Operating condition : -10˚C ~ 40˚C, ≤ 90%RH
Storage condition : -10˚C ~ 40˚C, ≤ 80%RH
Voltage stability : ≤ 0.01% + 2mV
Load stability : ≤ 0.01% + 2mV
Recovery time : ≤ 100µs
Ripple and noise : ≤ 1mVrms (effective value)
Temperature coefficient : ≤ 200PPM˚C
FEATURES
DC Regulated Power Supply is an easy to use, low ripple high regulation precision instrument.
It is particularly suitable for experimental development and low voltage applications.
Its unique feature is over load protection, which makes it a safe power source for testing of electronic equipment.
The power supply’s output is floating i.e., either the positive or negative output is connected to the chasis or ground.
Thus the power supply may be used as a positive or negative DC source by grounding -ve or +ve terminal respectively.
SKU: n/a
POWER GUARD
MECO PG 09 20A POWERGUARD
SPECIFICATIONS :
RMS VOLTAGE : 240V AC (Nominal) (195V ~ 265Vrms)
RMS CURRENT : (0.110 ~ 20.00) Arms
ACTIVE POWER : (0.026 ~ 4.800) KW,@240VAC (KW)
APPARENT POWER : (0.026 ~ 4.800) KVA,@240VAC (KVA)
REACTIVE POWER : (0.026 ~ 4.800) KVAr,@240VAC (KVAr)
POWER FACTOR : (0.026 ~ 0.120) KW,(0.120 ~ 4.800) KW
LINE FREQUENCY : 45.00 ~ 55.00 Hz
ACTIVE ENERGY : 000000 ~ 999999 KWh
FEATURES :
Three Pin Socket and Plug Suitable for Indian Socket
Large Dual Row LCD Display with Backlight and Annunciators
Memory Retention (KWh, EUT)
Simple, Easy and Accurate
Continuous Measurements
Counts CO2 generated by Electrical Equiptment (0.555kg CO2 is generated by using 1 KWh Energy)
SKU: n/a
pH/EC/TDS/TEMP METER
HM AP-2 AquaPro Water Quality …
HM Digital’s AquaPro series, is a handheld water quality tester which, with a modern design is perfect for today’s tech-savvy and health-conscience consumer. The AquaPro digital water testers are the next generation for today’s modern kitchen.
SKU: n/a
PH Meter
HANNA HI98107 pHep Waterproof …
Hanna’s HI98107 pHep® pH tester displays readings with 0.1 pH resolution, ±0.1 pH accuracy, and a range from 0.0 to 14.0 pH. This rugged, reliable, ergonomic, pocket-sized tester is designed for use in the lab or fields while keeping things simple with a two-button operation.
Extractable Cloth Junction to Extend pH Electrode Life
Has Automatic Temperature Compensation
For Use in Fresh Water
SKU: n/a
MULTIMETER
BEETECH B-511 DIGITAL SMART MU…
SPECIFICATIONS
DC Voltage:
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V
AC Voltage:
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V
DC Current:
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A
AC Current:
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A
Capacitance:
Range: 4 mF
Accuracy: ± 5% + 3 digits
Resolution: 0.001 mF
Range: 4 mF
Accuracy: ± 5% + 3 digits
Resolution: 0.001 mF
Frequency:
Range: 400 kHz
Accuracy: ± 1.0% + 3 digits
Resolution: 0.1 kHz
Range: 400 kHz
Accuracy: ± 1.0% + 3 digits
Resolution: 0.1 kHz
Resistance:
Range: 40 MΩ
Accuracy: ± 2.0% + 5 digits
Resolution: 0.01 MΩ
Range: 40 MΩ
Accuracy: ± 2.0% + 5 digits
Resolution: 0.01 MΩ
Temperature:
Operational: -10 ~ 50°C
Working: 0 ~ 40°C
Operational: -10 ~ 50°C
Working: 0 ~ 40°C
SKU: n/a
MOISTURE METER
BEETECH B-M2 Digital Moisture …
SPECIFICATIONS
Electrode Length : 10 mm
Electrodes : Replaceable
Moisture Range : Wood : 5 ~ 70% RH , Building Material : 0.1~2.4% RH
Temperature Range : -20 ~ 70°C / -4 ~ 122°F
Moisture Accuracy –
Wood : 5 ~ 30% : ±1%
30 ~ 60% : ±2%
60 ~ 70% : ±4%
Other: ±5%
Wood : 5 ~ 30% : ±1%
30 ~ 60% : ±2%
60 ~ 70% : ±4%
Other: ±5%
Temperature Accuracy : -20 ~ 70°C / -4 ~ 158°F : ±1.5°C / 2.7°F
Auto Power Off : After 120 seconds of inactivity
Operating Ambient Temperature : 0 ~ 50°C/32~122°F
Operating Ambient Humidity : 0 ~ 85% RH
Dimensions : 163 X 62 X 30 mm
Weight : 153 g
Accessories : User Manual , 9V Battery, Pouch with Box packing
FEATURES
Big LCD display with backlight.
Replaceable electrode pins .
Various materials measurement.
Analog bar and digital display values at same time.
Selectable measurement for wood or other building material.
Simultaneous measurement of moisture & temperature
SKU: n/a
METAL DETECTOR
BEETECH BMD-100 METAL DETECTOR
SPECIFICATIONS
Colour indication
RED – Metal Detection
GREEN – Power On
Clear RED – Charge indication
Sensitivity 0.1gm of any metal with minimum 6mm diameter can detect from 20 mm distance.
FEATURES
Indication audio buzzer
Automatic setting
Inbuilt battery charger
Light weight with strong ABS Body
Ultra sensitive with Instant operation
Search Area: 90 sq.mm
Detects all types of ferrous and non-ferrous Metal Alloys
Audio and Visual Indication
9 V Rechargeable NI-MN Battery.
Dimension: 330 (l) X50 (w) X35 (h)
SKU: n/a
LUX METER
BEETECH B-101 DIGITAL LUX METE…
SPECIFICATIONS
Display : 4 Digits color LCD display Measuring
Range : 0 Lux ~ 2,00,000 Lux / 0 Fc ~ 20,000 Fc (Foot Candles)
Accuracy : ±3% rdg ± 8d (<10,000 Lux) ; ± 4% rdg ± 10d (>10,000 Lux)
Temperature Range : -20 ~ 70°C / 4°F ~ 158°F |
Temperature Accuracy : ±1.5°C / 2.7°F
Spectral Response : CIE photopic (CIE Human Eye Response Curve)
Spectral Accuracy : CIE Vλ function (f1’ ≤ 6% f2’ ≤ 2%)
Over Range Indication : LCD Display “-OL-” or “-LO”
Sampling Rate : 2 Times / Second
Photo Detector : Silicon photo-diode with spectral response filter
Lux Resolution : <1000 : 0.1 ; > 1000 : 1
Temperature Resolution : 0.1
Operating Conditions : -20°C ~ 60°C, -4°F ~ 140°F, 10%RH ~ 90%RH
Storage Conditions : -20°C ~ 60°C, -4°F ~ 140°F, 10%RH ~ 75%RH
Power Supply : 3*1.5V “AAA” batteries
Battery Life : Approximately 60 hours
FEATURES
0 to 2,00,000 Lux / 20,000 Foot Candles
Auto Range Measurement
Measures both Lux and Foot-Candles
High Accuracy
Rapid Response Sampling Time
Temperature Measurement in °C / °F
Color LCD Display with backlight
Over Range Indication
Low Battery Indication
MAX / MIN / DATA HOLD
Enable / Disable auto power off
APPLICATIONS
Beetech B-101 is widely used in/by:
• Photographers
• Researchers
• Students
• Security Department
• Warehouse & Factories
• Art Galleries & Museum & Stadiums
• Hospital
• Educational Institutions & Libraries
• Public places
• Photographers
• Researchers
• Students
• Security Department
• Warehouse & Factories
• Art Galleries & Museum & Stadiums
• Hospital
• Educational Institutions & Libraries
• Public places
SKU: n/a
PROBES
HIOKI P2000 DC High Voltage Pr…
SPECIFICATIONS
Maximum Input Voltage : DC 2000 V
Maximum rated line-to-ground voltage
1000 V (Measurement Category IV), Anticipated transient overvoltage 12000 V
2000 V (Measurement Category III), Anticipated transient overvoltage 15000 V
1000 V (Measurement Category IV), Anticipated transient overvoltage 12000 V
2000 V (Measurement Category III), Anticipated transient overvoltage 15000 V
Input Resistance : 20 MΩ ±5.0% (between INPUT H and INPUT L, when OUTPUT terminal is open)
Overload Protection :
2200 V DC/2200 V AC (applied for 1 minute) (between INPUT H and INPUT L)
600 V DC/600 V AC (applied for 1 minute) (between OUTPUT H and OUTPUT L)
2200 V DC/2200 V AC (applied for 1 minute) (between INPUT H and INPUT L)
600 V DC/600 V AC (applied for 1 minute) (between OUTPUT H and OUTPUT L)
Output Terminal : 4 mm banana terminal
Operating Temperature Range : -25°C to 65°C (-13°F to 149°F)
Operating Humidity Range : −25°C to 40°C (−13°F to 104°F): 80% RH or less (non-condensing)
40°C to 65°C (104°F to 149°F): Linearly reduces from 80% RH or less at 40°C (104°F) to 25% RH or less at 65°C (149°F) (non-condensing)
40°C to 65°C (104°F to 149°F): Linearly reduces from 80% RH or less at 40°C (104°F) to 25% RH or less at 65°C (149°F) (non-condensing)
Storage temperature and humidity range : -30°C to 70°C (-22°F to 158°F) 90% RH or less (non-condensing)
Standards : EN 61010
Included Accessories : Connection Cable Set L4943 ×1, Strap with buckle ×2, Strap ×1, Carrying Case C0205 ×1, Instruction Manual ×1, Operating Precautions ×1
FEATURES
Enables high voltage measurement up to CAT Ⅲ 2000 V
Safely measure solar installations like the mega-solar without interrupting the grid
Connects to compatible Hioki clamp meters and digital multimeters (DMMs)
ACCURACY FOR COMPATIBLE INSTRUMENTS
DT-4261 :
Range 600.0 V: Combined accuracy ±0.5% rdg ±0.2 V
Range 2000 V: Combined accuracy ±0.5% rdg ±5 V
Range 600.0 V: Combined accuracy ±0.5% rdg ±0.2 V
Range 2000 V: Combined accuracy ±0.5% rdg ±5 V
CM4141-50 ; CM4371-50 ; CM4373-50 ; CM4375-50 :
Range 600.0 V: Combined accuracy ±1.0% rdg ±0.3 V
Range 2000 V: Combined accuracy ±1.0% rdg ±3 V
Range 600.0 V: Combined accuracy ±1.0% rdg ±0.3 V
Range 2000 V: Combined accuracy ±1.0% rdg ±3 V
DT-4282 ; DT-4281 :
Range 60.000 V: Combined accuracy ±0.8% rdg ±0.002 V (output rate 1/10)
Range 600.00 V: Combined accuracy ±0.8% rdg ±0.02 V (output rate 1/10)
Range 60.000 V: Combined accuracy ±0.8% rdg ±0.002 V (output rate 1/10)
Range 600.00 V: Combined accuracy ±0.8% rdg ±0.02 V (output rate 1/10)
DT-4252 ; DT-4253 :
Range 60.00 V: Combined accuracy ±1.2% rdg ±0.05 V (output rate 1/10)
Range 600.0 V: Combined accuracy ±1.2% rdg ±0.5 V (output rate 1/10)
Range 60.00 V: Combined accuracy ±1.2% rdg ±0.05 V (output rate 1/10)
Range 600.0 V: Combined accuracy ±1.2% rdg ±0.5 V (output rate 1/10)
DT-4255 ; DT-4256 :
Range 60.00 V: Combined accuracy ±1.2% rdg ±0.03 V (output rate 1/10)
Range 600.0 V: Combined accuracy ±1.2% rdg ±0.3 V (output rate 1/10)
Range 60.00 V: Combined accuracy ±1.2% rdg ±0.03 V (output rate 1/10)
Range 600.0 V: Combined accuracy ±1.2% rdg ±0.3 V (output rate 1/10)
SKU: n/a
POWER SUPPLY
BEETECH 3005 30V DC REGULATED …
SPECIFICATION
TECHNICAL SPECIFICATION
Voltage output range : 0 – 30V
Current output range : 0 – 5A
Current and voltage display model : A means pointer display, D means LED display
Display precision Pointer display : ± 2.5%
Digital display : ± 1% ± 1 word
PARAMETER SPECIFICATION
Input voltage: AC 220V ± 10% (switch to choose) 50/60Hz
Operating condition : -10˚C ~ 40˚C, ≤ 90%RH
Storage condition : -10˚C ~ 40˚C, ≤ 80%RH
Voltage stability : ≤ 0.01% + 2mV
Load stability : ≤ 0.01% + 2mV
Recovery time : ≤ 100µs
Ripple and noise : ≤ 1mVrms (effective value)
Temperature coefficient : ≤ 200PPM˚C
FEATURES
DC Regulated Power Supply is an easy to use, low ripple high regulation precision instrument.
It is particularly suitable for experimental development and low voltage applications.
Its unique feature is over load protection, which makes it a safe power source for testing of electronic equipment.
The power supply’s output is floating i.e., either the positive or negative output is connected to the chasis or ground.
Thus the power supply may be used as a positive or negative DC source by grounding -ve or +ve terminal respectively.
SKU: n/a
POWER GUARD
MECO PG 09 20A POWERGUARD
SPECIFICATIONS :
RMS VOLTAGE : 240V AC (Nominal) (195V ~ 265Vrms)
RMS CURRENT : (0.110 ~ 20.00) Arms
ACTIVE POWER : (0.026 ~ 4.800) KW,@240VAC (KW)
APPARENT POWER : (0.026 ~ 4.800) KVA,@240VAC (KVA)
REACTIVE POWER : (0.026 ~ 4.800) KVAr,@240VAC (KVAr)
POWER FACTOR : (0.026 ~ 0.120) KW,(0.120 ~ 4.800) KW
LINE FREQUENCY : 45.00 ~ 55.00 Hz
ACTIVE ENERGY : 000000 ~ 999999 KWh
FEATURES :
Three Pin Socket and Plug Suitable for Indian Socket
Large Dual Row LCD Display with Backlight and Annunciators
Memory Retention (KWh, EUT)
Simple, Easy and Accurate
Continuous Measurements
Counts CO2 generated by Electrical Equiptment (0.555kg CO2 is generated by using 1 KWh Energy)
SKU: n/a
pH/EC/TDS/TEMP METER
HM AP-2 AquaPro Water Quality …
HM Digital’s AquaPro series, is a handheld water quality tester which, with a modern design is perfect for today’s tech-savvy and health-conscience consumer. The AquaPro digital water testers are the next generation for today’s modern kitchen.
SKU: n/a
PH Meter
HANNA HI98107 pHep Waterproof …
Hanna’s HI98107 pHep® pH tester displays readings with 0.1 pH resolution, ±0.1 pH accuracy, and a range from 0.0 to 14.0 pH. This rugged, reliable, ergonomic, pocket-sized tester is designed for use in the lab or fields while keeping things simple with a two-button operation.
Extractable Cloth Junction to Extend pH Electrode Life
Has Automatic Temperature Compensation
For Use in Fresh Water
SKU: n/a
MULTIMETER
BEETECH B-511 DIGITAL SMART MU…
SPECIFICATIONS
DC Voltage:
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V
AC Voltage:
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V
DC Current:
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A
AC Current:
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A
Capacitance:
Range: 4 mF
Accuracy: ± 5% + 3 digits
Resolution: 0.001 mF
Range: 4 mF
Accuracy: ± 5% + 3 digits
Resolution: 0.001 mF
Frequency:
Range: 400 kHz
Accuracy: ± 1.0% + 3 digits
Resolution: 0.1 kHz
Range: 400 kHz
Accuracy: ± 1.0% + 3 digits
Resolution: 0.1 kHz
Resistance:
Range: 40 MΩ
Accuracy: ± 2.0% + 5 digits
Resolution: 0.01 MΩ
Range: 40 MΩ
Accuracy: ± 2.0% + 5 digits
Resolution: 0.01 MΩ
Temperature:
Operational: -10 ~ 50°C
Working: 0 ~ 40°C
Operational: -10 ~ 50°C
Working: 0 ~ 40°C
SKU: n/a
MOISTURE METER
BEETECH B-M2 Digital Moisture …
SPECIFICATIONS
Electrode Length : 10 mm
Electrodes : Replaceable
Moisture Range : Wood : 5 ~ 70% RH , Building Material : 0.1~2.4% RH
Temperature Range : -20 ~ 70°C / -4 ~ 122°F
Moisture Accuracy –
Wood : 5 ~ 30% : ±1%
30 ~ 60% : ±2%
60 ~ 70% : ±4%
Other: ±5%
Wood : 5 ~ 30% : ±1%
30 ~ 60% : ±2%
60 ~ 70% : ±4%
Other: ±5%
Temperature Accuracy : -20 ~ 70°C / -4 ~ 158°F : ±1.5°C / 2.7°F
Auto Power Off : After 120 seconds of inactivity
Operating Ambient Temperature : 0 ~ 50°C/32~122°F
Operating Ambient Humidity : 0 ~ 85% RH
Dimensions : 163 X 62 X 30 mm
Weight : 153 g
Accessories : User Manual , 9V Battery, Pouch with Box packing
FEATURES
Big LCD display with backlight.
Replaceable electrode pins .
Various materials measurement.
Analog bar and digital display values at same time.
Selectable measurement for wood or other building material.
Simultaneous measurement of moisture & temperature
SKU: n/a
METAL DETECTOR
BEETECH BMD-100 METAL DETECTOR
SPECIFICATIONS
Colour indication
RED – Metal Detection
GREEN – Power On
Clear RED – Charge indication
Sensitivity 0.1gm of any metal with minimum 6mm diameter can detect from 20 mm distance.
FEATURES
Indication audio buzzer
Automatic setting
Inbuilt battery charger
Light weight with strong ABS Body
Ultra sensitive with Instant operation
Search Area: 90 sq.mm
Detects all types of ferrous and non-ferrous Metal Alloys
Audio and Visual Indication
9 V Rechargeable NI-MN Battery.
Dimension: 330 (l) X50 (w) X35 (h)
SKU: n/a
LUX METER
BEETECH B-101 DIGITAL LUX METE…
SPECIFICATIONS
Display : 4 Digits color LCD display Measuring
Range : 0 Lux ~ 2,00,000 Lux / 0 Fc ~ 20,000 Fc (Foot Candles)
Accuracy : ±3% rdg ± 8d (<10,000 Lux) ; ± 4% rdg ± 10d (>10,000 Lux)
Temperature Range : -20 ~ 70°C / 4°F ~ 158°F |
Temperature Accuracy : ±1.5°C / 2.7°F
Spectral Response : CIE photopic (CIE Human Eye Response Curve)
Spectral Accuracy : CIE Vλ function (f1’ ≤ 6% f2’ ≤ 2%)
Over Range Indication : LCD Display “-OL-” or “-LO”
Sampling Rate : 2 Times / Second
Photo Detector : Silicon photo-diode with spectral response filter
Lux Resolution : <1000 : 0.1 ; > 1000 : 1
Temperature Resolution : 0.1
Operating Conditions : -20°C ~ 60°C, -4°F ~ 140°F, 10%RH ~ 90%RH
Storage Conditions : -20°C ~ 60°C, -4°F ~ 140°F, 10%RH ~ 75%RH
Power Supply : 3*1.5V “AAA” batteries
Battery Life : Approximately 60 hours
FEATURES
0 to 2,00,000 Lux / 20,000 Foot Candles
Auto Range Measurement
Measures both Lux and Foot-Candles
High Accuracy
Rapid Response Sampling Time
Temperature Measurement in °C / °F
Color LCD Display with backlight
Over Range Indication
Low Battery Indication
MAX / MIN / DATA HOLD
Enable / Disable auto power off
APPLICATIONS
Beetech B-101 is widely used in/by:
• Photographers
• Researchers
• Students
• Security Department
• Warehouse & Factories
• Art Galleries & Museum & Stadiums
• Hospital
• Educational Institutions & Libraries
• Public places
• Photographers
• Researchers
• Students
• Security Department
• Warehouse & Factories
• Art Galleries & Museum & Stadiums
• Hospital
• Educational Institutions & Libraries
• Public places
SKU: n/a
PROBES
HIOKI P2000 DC High Voltage Pr…
SPECIFICATIONS
Maximum Input Voltage : DC 2000 V
Maximum rated line-to-ground voltage
1000 V (Measurement Category IV), Anticipated transient overvoltage 12000 V
2000 V (Measurement Category III), Anticipated transient overvoltage 15000 V
1000 V (Measurement Category IV), Anticipated transient overvoltage 12000 V
2000 V (Measurement Category III), Anticipated transient overvoltage 15000 V
Input Resistance : 20 MΩ ±5.0% (between INPUT H and INPUT L, when OUTPUT terminal is open)
Overload Protection :
2200 V DC/2200 V AC (applied for 1 minute) (between INPUT H and INPUT L)
600 V DC/600 V AC (applied for 1 minute) (between OUTPUT H and OUTPUT L)
2200 V DC/2200 V AC (applied for 1 minute) (between INPUT H and INPUT L)
600 V DC/600 V AC (applied for 1 minute) (between OUTPUT H and OUTPUT L)
Output Terminal : 4 mm banana terminal
Operating Temperature Range : -25°C to 65°C (-13°F to 149°F)
Operating Humidity Range : −25°C to 40°C (−13°F to 104°F): 80% RH or less (non-condensing)
40°C to 65°C (104°F to 149°F): Linearly reduces from 80% RH or less at 40°C (104°F) to 25% RH or less at 65°C (149°F) (non-condensing)
40°C to 65°C (104°F to 149°F): Linearly reduces from 80% RH or less at 40°C (104°F) to 25% RH or less at 65°C (149°F) (non-condensing)
Storage temperature and humidity range : -30°C to 70°C (-22°F to 158°F) 90% RH or less (non-condensing)
Standards : EN 61010
Included Accessories : Connection Cable Set L4943 ×1, Strap with buckle ×2, Strap ×1, Carrying Case C0205 ×1, Instruction Manual ×1, Operating Precautions ×1
FEATURES
Enables high voltage measurement up to CAT Ⅲ 2000 V
Safely measure solar installations like the mega-solar without interrupting the grid
Connects to compatible Hioki clamp meters and digital multimeters (DMMs)
ACCURACY FOR COMPATIBLE INSTRUMENTS
DT-4261 :
Range 600.0 V: Combined accuracy ±0.5% rdg ±0.2 V
Range 2000 V: Combined accuracy ±0.5% rdg ±5 V
Range 600.0 V: Combined accuracy ±0.5% rdg ±0.2 V
Range 2000 V: Combined accuracy ±0.5% rdg ±5 V
CM4141-50 ; CM4371-50 ; CM4373-50 ; CM4375-50 :
Range 600.0 V: Combined accuracy ±1.0% rdg ±0.3 V
Range 2000 V: Combined accuracy ±1.0% rdg ±3 V
Range 600.0 V: Combined accuracy ±1.0% rdg ±0.3 V
Range 2000 V: Combined accuracy ±1.0% rdg ±3 V
DT-4282 ; DT-4281 :
Range 60.000 V: Combined accuracy ±0.8% rdg ±0.002 V (output rate 1/10)
Range 600.00 V: Combined accuracy ±0.8% rdg ±0.02 V (output rate 1/10)
Range 60.000 V: Combined accuracy ±0.8% rdg ±0.002 V (output rate 1/10)
Range 600.00 V: Combined accuracy ±0.8% rdg ±0.02 V (output rate 1/10)
DT-4252 ; DT-4253 :
Range 60.00 V: Combined accuracy ±1.2% rdg ±0.05 V (output rate 1/10)
Range 600.0 V: Combined accuracy ±1.2% rdg ±0.5 V (output rate 1/10)
Range 60.00 V: Combined accuracy ±1.2% rdg ±0.05 V (output rate 1/10)
Range 600.0 V: Combined accuracy ±1.2% rdg ±0.5 V (output rate 1/10)
DT-4255 ; DT-4256 :
Range 60.00 V: Combined accuracy ±1.2% rdg ±0.03 V (output rate 1/10)
Range 600.0 V: Combined accuracy ±1.2% rdg ±0.3 V (output rate 1/10)
Range 60.00 V: Combined accuracy ±1.2% rdg ±0.03 V (output rate 1/10)
Range 600.0 V: Combined accuracy ±1.2% rdg ±0.3 V (output rate 1/10)
SKU: n/a
POWER SUPPLY
BEETECH 3005 30V DC REGULATED …
SPECIFICATION
TECHNICAL SPECIFICATION
Voltage output range : 0 – 30V
Current output range : 0 – 5A
Current and voltage display model : A means pointer display, D means LED display
Display precision Pointer display : ± 2.5%
Digital display : ± 1% ± 1 word
PARAMETER SPECIFICATION
Input voltage: AC 220V ± 10% (switch to choose) 50/60Hz
Operating condition : -10˚C ~ 40˚C, ≤ 90%RH
Storage condition : -10˚C ~ 40˚C, ≤ 80%RH
Voltage stability : ≤ 0.01% + 2mV
Load stability : ≤ 0.01% + 2mV
Recovery time : ≤ 100µs
Ripple and noise : ≤ 1mVrms (effective value)
Temperature coefficient : ≤ 200PPM˚C
FEATURES
DC Regulated Power Supply is an easy to use, low ripple high regulation precision instrument.
It is particularly suitable for experimental development and low voltage applications.
Its unique feature is over load protection, which makes it a safe power source for testing of electronic equipment.
The power supply’s output is floating i.e., either the positive or negative output is connected to the chasis or ground.
Thus the power supply may be used as a positive or negative DC source by grounding -ve or +ve terminal respectively.
SKU: n/a
POWER GUARD
MECO PG 09 20A POWERGUARD
SPECIFICATIONS :
RMS VOLTAGE : 240V AC (Nominal) (195V ~ 265Vrms)
RMS CURRENT : (0.110 ~ 20.00) Arms
ACTIVE POWER : (0.026 ~ 4.800) KW,@240VAC (KW)
APPARENT POWER : (0.026 ~ 4.800) KVA,@240VAC (KVA)
REACTIVE POWER : (0.026 ~ 4.800) KVAr,@240VAC (KVAr)
POWER FACTOR : (0.026 ~ 0.120) KW,(0.120 ~ 4.800) KW
LINE FREQUENCY : 45.00 ~ 55.00 Hz
ACTIVE ENERGY : 000000 ~ 999999 KWh
FEATURES :
Three Pin Socket and Plug Suitable for Indian Socket
Large Dual Row LCD Display with Backlight and Annunciators
Memory Retention (KWh, EUT)
Simple, Easy and Accurate
Continuous Measurements
Counts CO2 generated by Electrical Equiptment (0.555kg CO2 is generated by using 1 KWh Energy)
SKU: n/a
pH/EC/TDS/TEMP METER
HM AP-2 AquaPro Water Quality …
HM Digital’s AquaPro series, is a handheld water quality tester which, with a modern design is perfect for today’s tech-savvy and health-conscience consumer. The AquaPro digital water testers are the next generation for today’s modern kitchen.
SKU: n/a
PH Meter
HANNA HI98107 pHep Waterproof …
Hanna’s HI98107 pHep® pH tester displays readings with 0.1 pH resolution, ±0.1 pH accuracy, and a range from 0.0 to 14.0 pH. This rugged, reliable, ergonomic, pocket-sized tester is designed for use in the lab or fields while keeping things simple with a two-button operation.
Extractable Cloth Junction to Extend pH Electrode Life
Has Automatic Temperature Compensation
For Use in Fresh Water
SKU: n/a
MULTIMETER
BEETECH B-511 DIGITAL SMART MU…
SPECIFICATIONS
DC Voltage:
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V
AC Voltage:
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V
DC Current:
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A
AC Current:
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A
Capacitance:
Range: 4 mF
Accuracy: ± 5% + 3 digits
Resolution: 0.001 mF
Range: 4 mF
Accuracy: ± 5% + 3 digits
Resolution: 0.001 mF
Frequency:
Range: 400 kHz
Accuracy: ± 1.0% + 3 digits
Resolution: 0.1 kHz
Range: 400 kHz
Accuracy: ± 1.0% + 3 digits
Resolution: 0.1 kHz
Resistance:
Range: 40 MΩ
Accuracy: ± 2.0% + 5 digits
Resolution: 0.01 MΩ
Range: 40 MΩ
Accuracy: ± 2.0% + 5 digits
Resolution: 0.01 MΩ
Temperature:
Operational: -10 ~ 50°C
Working: 0 ~ 40°C
Operational: -10 ~ 50°C
Working: 0 ~ 40°C
SKU: n/a
MOISTURE METER
BEETECH B-M2 Digital Moisture …
SPECIFICATIONS
Electrode Length : 10 mm
Electrodes : Replaceable
Moisture Range : Wood : 5 ~ 70% RH , Building Material : 0.1~2.4% RH
Temperature Range : -20 ~ 70°C / -4 ~ 122°F
Moisture Accuracy –
Wood : 5 ~ 30% : ±1%
30 ~ 60% : ±2%
60 ~ 70% : ±4%
Other: ±5%
Wood : 5 ~ 30% : ±1%
30 ~ 60% : ±2%
60 ~ 70% : ±4%
Other: ±5%
Temperature Accuracy : -20 ~ 70°C / -4 ~ 158°F : ±1.5°C / 2.7°F
Auto Power Off : After 120 seconds of inactivity
Operating Ambient Temperature : 0 ~ 50°C/32~122°F
Operating Ambient Humidity : 0 ~ 85% RH
Dimensions : 163 X 62 X 30 mm
Weight : 153 g
Accessories : User Manual , 9V Battery, Pouch with Box packing
FEATURES
Big LCD display with backlight.
Replaceable electrode pins .
Various materials measurement.
Analog bar and digital display values at same time.
Selectable measurement for wood or other building material.
Simultaneous measurement of moisture & temperature
SKU: n/a
METAL DETECTOR
BEETECH BMD-100 METAL DETECTOR
SPECIFICATIONS
Colour indication
RED – Metal Detection
GREEN – Power On
Clear RED – Charge indication
Sensitivity 0.1gm of any metal with minimum 6mm diameter can detect from 20 mm distance.
FEATURES
Indication audio buzzer
Automatic setting
Inbuilt battery charger
Light weight with strong ABS Body
Ultra sensitive with Instant operation
Search Area: 90 sq.mm
Detects all types of ferrous and non-ferrous Metal Alloys
Audio and Visual Indication
9 V Rechargeable NI-MN Battery.
Dimension: 330 (l) X50 (w) X35 (h)
SKU: n/a
LUX METER
BEETECH B-101 DIGITAL LUX METE…
SPECIFICATIONS
Display : 4 Digits color LCD display Measuring
Range : 0 Lux ~ 2,00,000 Lux / 0 Fc ~ 20,000 Fc (Foot Candles)
Accuracy : ±3% rdg ± 8d (<10,000 Lux) ; ± 4% rdg ± 10d (>10,000 Lux)
Temperature Range : -20 ~ 70°C / 4°F ~ 158°F |
Temperature Accuracy : ±1.5°C / 2.7°F
Spectral Response : CIE photopic (CIE Human Eye Response Curve)
Spectral Accuracy : CIE Vλ function (f1’ ≤ 6% f2’ ≤ 2%)
Over Range Indication : LCD Display “-OL-” or “-LO”
Sampling Rate : 2 Times / Second
Photo Detector : Silicon photo-diode with spectral response filter
Lux Resolution : <1000 : 0.1 ; > 1000 : 1
Temperature Resolution : 0.1
Operating Conditions : -20°C ~ 60°C, -4°F ~ 140°F, 10%RH ~ 90%RH
Storage Conditions : -20°C ~ 60°C, -4°F ~ 140°F, 10%RH ~ 75%RH
Power Supply : 3*1.5V “AAA” batteries
Battery Life : Approximately 60 hours
FEATURES
0 to 2,00,000 Lux / 20,000 Foot Candles
Auto Range Measurement
Measures both Lux and Foot-Candles
High Accuracy
Rapid Response Sampling Time
Temperature Measurement in °C / °F
Color LCD Display with backlight
Over Range Indication
Low Battery Indication
MAX / MIN / DATA HOLD
Enable / Disable auto power off
APPLICATIONS
Beetech B-101 is widely used in/by:
• Photographers
• Researchers
• Students
• Security Department
• Warehouse & Factories
• Art Galleries & Museum & Stadiums
• Hospital
• Educational Institutions & Libraries
• Public places
• Photographers
• Researchers
• Students
• Security Department
• Warehouse & Factories
• Art Galleries & Museum & Stadiums
• Hospital
• Educational Institutions & Libraries
• Public places
SKU: n/a
Bestsellers
Laptops & Computers
BREATH ALCOHOL ANALYSER
AL-6000
SPECIFICATIONS
Normal Mode : 0.00 to 4.00 %0 or 0.000 to 0.400%BAC or 0.00 to 2.00 mg/l BrAC by LED display
Fast (Screening) Mode: “0”, “Low” and “High” 3 steps
Fast (Screening) Mode: “0”, “Low” and “High” 3 steps
Sensor : Semiconductor type alcohol sensor
Accuracy : 0.01%BAC at 0.05%BAC
Power : Two 1.5V “AA” size alkaline batteries I Auto Power off
Weight : 115g (Including Batteries)
Dimensions : 124 (height) X 56 (width) X 41 (thickness) MAX
Audible Warnings : 3 steps beep warning of alcohol Detection with LED display
Colour : Silver
SKU: n/a
POWER SUPPLY
BEETECH 3005 30V DC REGULATED …
SPECIFICATION
TECHNICAL SPECIFICATION
Voltage output range : 0 – 30V
Current output range : 0 – 5A
Current and voltage display model : A means pointer display, D means LED display
Display precision Pointer display : ± 2.5%
Digital display : ± 1% ± 1 word
PARAMETER SPECIFICATION
Input voltage: AC 220V ± 10% (switch to choose) 50/60Hz
Operating condition : -10˚C ~ 40˚C, ≤ 90%RH
Storage condition : -10˚C ~ 40˚C, ≤ 80%RH
Voltage stability : ≤ 0.01% + 2mV
Load stability : ≤ 0.01% + 2mV
Recovery time : ≤ 100µs
Ripple and noise : ≤ 1mVrms (effective value)
Temperature coefficient : ≤ 200PPM˚C
FEATURES
DC Regulated Power Supply is an easy to use, low ripple high regulation precision instrument.
It is particularly suitable for experimental development and low voltage applications.
Its unique feature is over load protection, which makes it a safe power source for testing of electronic equipment.
The power supply’s output is floating i.e., either the positive or negative output is connected to the chasis or ground.
Thus the power supply may be used as a positive or negative DC source by grounding -ve or +ve terminal respectively.
SKU: n/a
LUX METER
BEETECH B-101 DIGITAL LUX METE…
SPECIFICATIONS
Display : 4 Digits color LCD display Measuring
Range : 0 Lux ~ 2,00,000 Lux / 0 Fc ~ 20,000 Fc (Foot Candles)
Accuracy : ±3% rdg ± 8d (<10,000 Lux) ; ± 4% rdg ± 10d (>10,000 Lux)
Temperature Range : -20 ~ 70°C / 4°F ~ 158°F |
Temperature Accuracy : ±1.5°C / 2.7°F
Spectral Response : CIE photopic (CIE Human Eye Response Curve)
Spectral Accuracy : CIE Vλ function (f1’ ≤ 6% f2’ ≤ 2%)
Over Range Indication : LCD Display “-OL-” or “-LO”
Sampling Rate : 2 Times / Second
Photo Detector : Silicon photo-diode with spectral response filter
Lux Resolution : <1000 : 0.1 ; > 1000 : 1
Temperature Resolution : 0.1
Operating Conditions : -20°C ~ 60°C, -4°F ~ 140°F, 10%RH ~ 90%RH
Storage Conditions : -20°C ~ 60°C, -4°F ~ 140°F, 10%RH ~ 75%RH
Power Supply : 3*1.5V “AAA” batteries
Battery Life : Approximately 60 hours
FEATURES
0 to 2,00,000 Lux / 20,000 Foot Candles
Auto Range Measurement
Measures both Lux and Foot-Candles
High Accuracy
Rapid Response Sampling Time
Temperature Measurement in °C / °F
Color LCD Display with backlight
Over Range Indication
Low Battery Indication
MAX / MIN / DATA HOLD
Enable / Disable auto power off
APPLICATIONS
Beetech B-101 is widely used in/by:
• Photographers
• Researchers
• Students
• Security Department
• Warehouse & Factories
• Art Galleries & Museum & Stadiums
• Hospital
• Educational Institutions & Libraries
• Public places
• Photographers
• Researchers
• Students
• Security Department
• Warehouse & Factories
• Art Galleries & Museum & Stadiums
• Hospital
• Educational Institutions & Libraries
• Public places
SKU: n/a
ANEMOMETER
BEETECH B-201 DIGITAL THERMO-A…
SPECIFICATIONS
AIR VELOCITY RANGE
RANGE : 0.4~30.0 m/s
RESOLUTION :0.1 m/s
ACCURACY : ±3%±0.3m/s
RANGE : 1.4~108 km/h
RESOLUTION : 0.1 km/h
ACCURACY : ±3%±1.0km/H
RANGE : 0.9~67.0 f Mph
RESOLUTION : 0.1 Mph
ACCURACY : ±3%±0.4 Mph
RANGE : 0.8~58.0 Knots
RESOLUTION : 0.1 Knots
ACCURACY : ±3%±0.4 Knots
RANGE : 0.8~58.0 Knots
RESOLUTION : 0.1 Knots
ACCURACY : ±3%±0.4 Knots
Temperature Range : -20~70°C/-4~158°F
Temperature Accuracy : ±1.5°C/2.7°F
Temperature Resolution : 0.1
Data Update : 300ms
Operating Conditions : -20°C ~ 60°C, -4°F ~ 140°F, 10%RH ~ 90%RH
Storage Conditions : -20°C ~ 60°C, -4°F ~ 140°F, 10%RH ~ 75%RH
Power Supply : 3*1.5V “AAA” batteries
Battery Life : Approximately 60 hours
PRODUCT FEATURES
• Selectable measurement units:
1. m/s
2. Ft/min
3. MPH
4. Km/hr
5. Knots
• Fast Sampling Rate
• Max / Min / Data Hold
• Over Range Indication Low Battery Indication
• Enable / Disable Auto Power Off
APPLICATION
Beetech B-201 is widely used in/by:
• Weather Stations
• Drone users
• Iron and Steel Industry
• HVAC Industry
• Heating Systems
• Mining Industry
• Fan Manufacturers
• Sporting events
• Petrochemical Industry
• Long Range Shooters
• Pilots
• Sky divers
• Aero-dynamics
SKU: n/a
MULTIMETER
BEETECH B-511 DIGITAL SMART MU…
SPECIFICATIONS
DC Voltage:
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V
AC Voltage:
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V
DC Current:
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A
AC Current:
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A
Capacitance:
Range: 4 mF
Accuracy: ± 5% + 3 digits
Resolution: 0.001 mF
Range: 4 mF
Accuracy: ± 5% + 3 digits
Resolution: 0.001 mF
Frequency:
Range: 400 kHz
Accuracy: ± 1.0% + 3 digits
Resolution: 0.1 kHz
Range: 400 kHz
Accuracy: ± 1.0% + 3 digits
Resolution: 0.1 kHz
Resistance:
Range: 40 MΩ
Accuracy: ± 2.0% + 5 digits
Resolution: 0.01 MΩ
Range: 40 MΩ
Accuracy: ± 2.0% + 5 digits
Resolution: 0.01 MΩ
Temperature:
Operational: -10 ~ 50°C
Working: 0 ~ 40°C
Operational: -10 ~ 50°C
Working: 0 ~ 40°C
SKU: n/a
CLAMPMETER
BEETECH B-6010 600A AC TRUE RM…
SPECIFICATIONS
DC Voltage: 600V
Accuracy: ±(1% + 2 digits)
Resolution: 1V
Input Resistance: About 10MΩ
Max. Input Voltage: 600V DC or 600V RMS AC
Accuracy: ±(1% + 2 digits)
Resolution: 1V
Input Resistance: About 10MΩ
Max. Input Voltage: 600V DC or 600V RMS AC
AC Voltage: 600V
Accuracy: ±(1.2% + 10 digits)
Resolution: 1V
Input Resistance: About 10MΩ
Frequency range: 40Hz – 400Hz
Max. Input Voltage: 600V DC or 600V RMS AC
Accuracy: ±(1.2% + 10 digits)
Resolution: 1V
Input Resistance: About 10MΩ
Frequency range: 40Hz – 400Hz
Max. Input Voltage: 600V DC or 600V RMS AC
AC Current: 600A
Accuracy: ±(2.5% + 10 digits)
Resolution: 0.1A
Frequency Range: 50Hz ~ 60Hz
Max. Input Current: 120% of full scale, less than 60 seconds
Accuracy: ±(2.5% + 10 digits)
Resolution: 0.1A
Frequency Range: 50Hz ~ 60Hz
Max. Input Current: 120% of full scale, less than 60 seconds
Resistance: 40MΩ
Accuracy: ±(2% + 5 digits)
Resolution: 10kΩ
( Overload Protection: 600V DC or 600V RMS AC )
Accuracy: ±(2% + 5 digits)
Resolution: 10kΩ
( Overload Protection: 600V DC or 600V RMS AC )
Capacitance: 40mF
Accuracy: ±(4% + 3 digits )
Resolution: 10uF
( Overload Protection: 600V DC or 600V RMS AC )
Accuracy: ±(4% + 3 digits )
Resolution: 10uF
( Overload Protection: 600V DC or 600V RMS AC )
Diode test: Forward voltage drop value (open circuit voltage about 2.3V)
Continuity test: Beeper sounds when resistance is less than 50 OHMS (open circuit voltage about 2.1V)
Jaw size: 26 mm.
FEATURES
Display: LCD
4000 Counts
3 ¾ Digits
AC & DC Voltage
AC Current
True-RMS
Resistance
Capacitance
Jaw Open Size: 26mm
NCV
Diode Test
Continuity Buzzer
Overload Protection
Shock Proof Protection
Input Impedence
Backlight
Torch
Auto Power Off
Low Battery Display
SKU: n/a
CLAMPMETER
BEETECH B-6013 600A AC DUAL RE…
SPECIFICATIONS
DC Voltage: 600V
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
Input Resistance: About 10MΩ
Max. Input Voltage: 600V DC
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
Input Resistance: About 10MΩ
Max. Input Voltage: 600V DC
AC Voltage: 600V
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
Input Resistance: About 10MΩ
Frequency range: 40Hz – 400Hz -Response: True RMS
Max. Input Voltage: 600V AC (effective value)
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
Input Resistance: About 10MΩ
Frequency range: 40Hz – 400Hz -Response: True RMS
Max. Input Voltage: 600V AC (effective value)
AC Current: 600A
Accuracy: ±(3.0% + 6 digits)
Resolution: 0.1A
Frequency Range: 40Hz ~ 400Hz – Response: average value.
Max. Input Current: 600A DC
Max. Input Current: 600A AC
Accuracy: ±(3.0% + 6 digits)
Resolution: 0.1A
Frequency Range: 40Hz ~ 400Hz – Response: average value.
Max. Input Current: 600A DC
Max. Input Current: 600A AC
Resistance: 60MΩ
Accuracy: ±(1.2% + 3 digits)
Resolution: 0.1mΩ
( Overload Protection: 250V DC or 250VAC )
Accuracy: ±(1.2% + 3 digits)
Resolution: 0.1mΩ
( Overload Protection: 250V DC or 250VAC )
Capacitance: 60mF
Accuracy: ±(4.5% + 5 digits )
Resolution: 0.01MF
( Overload Protection: 600V DC or 600V AC )
Accuracy: ±(4.5% + 5 digits )
Resolution: 0.01MF
( Overload Protection: 600V DC or 600V AC )
Frequency: 10 mHz
Accuracy: ±(0.5% + 2 digits )
Resolution: 0.001 Mhz
Accuracy: ±(0.5% + 2 digits )
Resolution: 0.001 Mhz
Diode Test: Display approximate for ward voltage of diode:
Forward DC Current is about 1mA
Reverse DC voltage is about 3.3V
Forward DC Current is about 1mA
Reverse DC voltage is about 3.3V
Continuity: Beeper sounds when resistance is less than 50 OHMS (open circuit voltage about 2.1V)
Jaw size: 30 mm
FEATURES
Display: LCD
6000 Counts
3 5/6 Digits
AC & DC Voltage
AC Current
True-RMS
Resistance
Capacitance
Frequency
Temperature
Jaw Open Size: 30mm
NCV
Diode Test
Continuity Buzzer
Overload Protection
Shock Proof Protection
Backlight
Torch
Auto Power Off
Low Battery Display
SKU: n/a
CLAMPMETER
BEETECH B-6018 SMART 600A AC D…
SPECIFICATIONS
DC Voltage: 600V
Accuracy: ±(0.5% + 3 digits)
Resolution: 0.1V
In AUTO mode, input voltage ranges from 0.8V to 600V DC
Input voltage range in mV mode: 0.0mV ~ 600 mV DC
Accuracy: ±(0.5% + 3 digits)
Resolution: 0.1V
In AUTO mode, input voltage ranges from 0.8V to 600V DC
Input voltage range in mV mode: 0.0mV ~ 600 mV DC
AC Voltage(T-RMS): 600V
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
In AUTO mode, input voltage ranges from 0.8V to 600V AC
Input Voltage range in mV mode: 0.0mV to 600mV AC
Frequency: 40Hz ~ 1000Hz
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
In AUTO mode, input voltage ranges from 0.8V to 600V AC
Input Voltage range in mV mode: 0.0mV to 600mV AC
Frequency: 40Hz ~ 1000Hz
AC Current: 600A
Accuracy: ±(1.0% + 8 digits)
Resolution: 0.1A
Frequency Range: 40Hz ~ 400Hz – Response: average value
Min. Input Current: 0.8A AC
Max. Input Current: 600A AC
Accuracy: ±(1.0% + 8 digits)
Resolution: 0.1A
Frequency Range: 40Hz ~ 400Hz – Response: average value
Min. Input Current: 0.8A AC
Max. Input Current: 600A AC
Resistance: 60MΩ
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1MΩ
Open Circuit voltage: approx.. 0.4V
Overload Protection: 600V DC or AC (valid value)
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1MΩ
Open Circuit voltage: approx.. 0.4V
Overload Protection: 600V DC or AC (valid value)
Capacitance: 60 mF
Accuracy: ±(2.5% + 20 digits)
Resolution: 0.001 mF
Overload Protection: 600V DC or AC Valid value
Accuracy: ±(2.5% + 20 digits)
Resolution: 0.001 mF
Overload Protection: 600V DC or AC Valid value
Frequency: 10Mhz
Accuracy: ±(2.5% + 20 digits)
Resolution: 0.001 Mhz
Measuring range: 1Hz ~ 10Mhz
Input signal pattern: >0.8V AC current (RMS)
Accuracy: ±(2.5% + 20 digits)
Resolution: 0.001 Mhz
Measuring range: 1Hz ~ 10Mhz
Input signal pattern: >0.8V AC current (RMS)
Diode Test: Display approximate for ward voltage of diode
Continuity: Built in Buzzer will be sounded if resistance is less than 50 Ohms
FEATURES
Display: LCD
6000 Counts
3 5/6 Digits
AC & DC Voltage
AC Current
True-RMS
Resistance
Capacitance
Frequency
Temperature
Jaw Open Size: 30mm
NCV
Diode Test
Continuity Buzzer
Overload Protection
Shock Proof Protection
Input Impedence
Backlight
Torch
Auto Power Off
Low Battery Display
SKU: n/a
CLAMPMETER
BEETECH B-6023 600V 600A AC/DC…
SPECIFICATIONS
DC Voltage: 600V
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
Response average input impedance: 10MΩ
Max. Input Voltage: 600V DC
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
Response average input impedance: 10MΩ
Max. Input Voltage: 600V DC
AC Voltage: 600V
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
Input Resistance: 10MΩ
Frequency range: 40Hz – 400Hz
Response: True RM
Max. Input Voltage: 600V DC (effective value)
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
Input Resistance: 10MΩ
Frequency range: 40Hz – 400Hz
Response: True RM
Max. Input Voltage: 600V DC (effective value)
AC Current: 600A
Accuracy: ±(3.0% + 6 digits)
Resolution: 0.1A
Frequency Range: 40Hz ~ 400Hz Response: Avg. Value
Max. Input Current: 600A AC
Accuracy: ±(3.0% + 6 digits)
Resolution: 0.1A
Frequency Range: 40Hz ~ 400Hz Response: Avg. Value
Max. Input Current: 600A AC
AC Current: 600A
Accuracy: ±(2.5% + 8 digits)
Resolution: 0.1A
Max. Input Current: 600A DC
Accuracy: ±(2.5% + 8 digits)
Resolution: 0.1A
Max. Input Current: 600A DC
Resistance: 60MΩ
Accuracy: ±(1.2% + 3 digits)
Resolution: 0.1MΩ
Overload Protection: 250V DC or AC (valid value)
Open Circuit Voltage: Approx. 0.4V
Accuracy: ±(1.2% + 3 digits)
Resolution: 0.1MΩ
Overload Protection: 250V DC or AC (valid value)
Open Circuit Voltage: Approx. 0.4V
Capacitance: 60mF
Accuracy: ±(4.5% + 5 digits)
Resolution: 0.01mF
Overload Protection: 250V DC or AC (valid value)
Accuracy: ±(4.5% + 5 digits)
Resolution: 0.01mF
Overload Protection: 250V DC or AC (valid value)
Frequency: 10Mhz
Accuracy: ±(0.5% + 2 digits)
Resolution: 0.001Mhz
Accuracy: ±(0.5% + 2 digits)
Resolution: 0.001Mhz
Diode Test: 00.1V Display approximate for ward voltage of Diode.
• Forward DC Current is about 1mA.
• Reverse DC voltage is about 3.3V
• Overload Protection:250V DC or AC (valid value)
• Forward DC Current is about 1mA.
• Reverse DC voltage is about 3.3V
• Overload Protection:250V DC or AC (valid value)
Continuity Test: 0.1Ω Built-in buzzer will be sounded if resistance is less than 50Ω
• Overload Protection:250V DC or AC (valid value)
• Overload Protection:250V DC or AC (valid value)
FEATURES
Display: LCD
6000 Counts
3 5/6 Digits
AC & DC Voltage
AC & DC Current
True-RMS
Resistance
Capacitance
Frequency
Temperature
Jaw Open Size: 30mm
NCV
Diode Test
Continuity Buzzer
Overload Protection
Shock Proof Protection
Input Impedence
Backlight
Torch
Auto Power Off
Low Battery Display
SKU: n/a
Smartphones
BREATH ALCOHOL ANALYSER
AL-6000
SPECIFICATIONS
Normal Mode : 0.00 to 4.00 %0 or 0.000 to 0.400%BAC or 0.00 to 2.00 mg/l BrAC by LED display
Fast (Screening) Mode: “0”, “Low” and “High” 3 steps
Fast (Screening) Mode: “0”, “Low” and “High” 3 steps
Sensor : Semiconductor type alcohol sensor
Accuracy : 0.01%BAC at 0.05%BAC
Power : Two 1.5V “AA” size alkaline batteries I Auto Power off
Weight : 115g (Including Batteries)
Dimensions : 124 (height) X 56 (width) X 41 (thickness) MAX
Audible Warnings : 3 steps beep warning of alcohol Detection with LED display
Colour : Silver
SKU: n/a
POWER SUPPLY
BEETECH 3005 30V DC REGULATED …
SPECIFICATION
TECHNICAL SPECIFICATION
Voltage output range : 0 – 30V
Current output range : 0 – 5A
Current and voltage display model : A means pointer display, D means LED display
Display precision Pointer display : ± 2.5%
Digital display : ± 1% ± 1 word
PARAMETER SPECIFICATION
Input voltage: AC 220V ± 10% (switch to choose) 50/60Hz
Operating condition : -10˚C ~ 40˚C, ≤ 90%RH
Storage condition : -10˚C ~ 40˚C, ≤ 80%RH
Voltage stability : ≤ 0.01% + 2mV
Load stability : ≤ 0.01% + 2mV
Recovery time : ≤ 100µs
Ripple and noise : ≤ 1mVrms (effective value)
Temperature coefficient : ≤ 200PPM˚C
FEATURES
DC Regulated Power Supply is an easy to use, low ripple high regulation precision instrument.
It is particularly suitable for experimental development and low voltage applications.
Its unique feature is over load protection, which makes it a safe power source for testing of electronic equipment.
The power supply’s output is floating i.e., either the positive or negative output is connected to the chasis or ground.
Thus the power supply may be used as a positive or negative DC source by grounding -ve or +ve terminal respectively.
SKU: n/a
LUX METER
BEETECH B-101 DIGITAL LUX METE…
SPECIFICATIONS
Display : 4 Digits color LCD display Measuring
Range : 0 Lux ~ 2,00,000 Lux / 0 Fc ~ 20,000 Fc (Foot Candles)
Accuracy : ±3% rdg ± 8d (<10,000 Lux) ; ± 4% rdg ± 10d (>10,000 Lux)
Temperature Range : -20 ~ 70°C / 4°F ~ 158°F |
Temperature Accuracy : ±1.5°C / 2.7°F
Spectral Response : CIE photopic (CIE Human Eye Response Curve)
Spectral Accuracy : CIE Vλ function (f1’ ≤ 6% f2’ ≤ 2%)
Over Range Indication : LCD Display “-OL-” or “-LO”
Sampling Rate : 2 Times / Second
Photo Detector : Silicon photo-diode with spectral response filter
Lux Resolution : <1000 : 0.1 ; > 1000 : 1
Temperature Resolution : 0.1
Operating Conditions : -20°C ~ 60°C, -4°F ~ 140°F, 10%RH ~ 90%RH
Storage Conditions : -20°C ~ 60°C, -4°F ~ 140°F, 10%RH ~ 75%RH
Power Supply : 3*1.5V “AAA” batteries
Battery Life : Approximately 60 hours
FEATURES
0 to 2,00,000 Lux / 20,000 Foot Candles
Auto Range Measurement
Measures both Lux and Foot-Candles
High Accuracy
Rapid Response Sampling Time
Temperature Measurement in °C / °F
Color LCD Display with backlight
Over Range Indication
Low Battery Indication
MAX / MIN / DATA HOLD
Enable / Disable auto power off
APPLICATIONS
Beetech B-101 is widely used in/by:
• Photographers
• Researchers
• Students
• Security Department
• Warehouse & Factories
• Art Galleries & Museum & Stadiums
• Hospital
• Educational Institutions & Libraries
• Public places
• Photographers
• Researchers
• Students
• Security Department
• Warehouse & Factories
• Art Galleries & Museum & Stadiums
• Hospital
• Educational Institutions & Libraries
• Public places
SKU: n/a
ANEMOMETER
BEETECH B-201 DIGITAL THERMO-A…
SPECIFICATIONS
AIR VELOCITY RANGE
RANGE : 0.4~30.0 m/s
RESOLUTION :0.1 m/s
ACCURACY : ±3%±0.3m/s
RANGE : 1.4~108 km/h
RESOLUTION : 0.1 km/h
ACCURACY : ±3%±1.0km/H
RANGE : 0.9~67.0 f Mph
RESOLUTION : 0.1 Mph
ACCURACY : ±3%±0.4 Mph
RANGE : 0.8~58.0 Knots
RESOLUTION : 0.1 Knots
ACCURACY : ±3%±0.4 Knots
RANGE : 0.8~58.0 Knots
RESOLUTION : 0.1 Knots
ACCURACY : ±3%±0.4 Knots
Temperature Range : -20~70°C/-4~158°F
Temperature Accuracy : ±1.5°C/2.7°F
Temperature Resolution : 0.1
Data Update : 300ms
Operating Conditions : -20°C ~ 60°C, -4°F ~ 140°F, 10%RH ~ 90%RH
Storage Conditions : -20°C ~ 60°C, -4°F ~ 140°F, 10%RH ~ 75%RH
Power Supply : 3*1.5V “AAA” batteries
Battery Life : Approximately 60 hours
PRODUCT FEATURES
• Selectable measurement units:
1. m/s
2. Ft/min
3. MPH
4. Km/hr
5. Knots
• Fast Sampling Rate
• Max / Min / Data Hold
• Over Range Indication Low Battery Indication
• Enable / Disable Auto Power Off
APPLICATION
Beetech B-201 is widely used in/by:
• Weather Stations
• Drone users
• Iron and Steel Industry
• HVAC Industry
• Heating Systems
• Mining Industry
• Fan Manufacturers
• Sporting events
• Petrochemical Industry
• Long Range Shooters
• Pilots
• Sky divers
• Aero-dynamics
SKU: n/a
MULTIMETER
BEETECH B-511 DIGITAL SMART MU…
SPECIFICATIONS
DC Voltage:
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V
AC Voltage:
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V
DC Current:
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A
AC Current:
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A
Capacitance:
Range: 4 mF
Accuracy: ± 5% + 3 digits
Resolution: 0.001 mF
Range: 4 mF
Accuracy: ± 5% + 3 digits
Resolution: 0.001 mF
Frequency:
Range: 400 kHz
Accuracy: ± 1.0% + 3 digits
Resolution: 0.1 kHz
Range: 400 kHz
Accuracy: ± 1.0% + 3 digits
Resolution: 0.1 kHz
Resistance:
Range: 40 MΩ
Accuracy: ± 2.0% + 5 digits
Resolution: 0.01 MΩ
Range: 40 MΩ
Accuracy: ± 2.0% + 5 digits
Resolution: 0.01 MΩ
Temperature:
Operational: -10 ~ 50°C
Working: 0 ~ 40°C
Operational: -10 ~ 50°C
Working: 0 ~ 40°C
SKU: n/a
CLAMPMETER
BEETECH B-6010 600A AC TRUE RM…
SPECIFICATIONS
DC Voltage: 600V
Accuracy: ±(1% + 2 digits)
Resolution: 1V
Input Resistance: About 10MΩ
Max. Input Voltage: 600V DC or 600V RMS AC
Accuracy: ±(1% + 2 digits)
Resolution: 1V
Input Resistance: About 10MΩ
Max. Input Voltage: 600V DC or 600V RMS AC
AC Voltage: 600V
Accuracy: ±(1.2% + 10 digits)
Resolution: 1V
Input Resistance: About 10MΩ
Frequency range: 40Hz – 400Hz
Max. Input Voltage: 600V DC or 600V RMS AC
Accuracy: ±(1.2% + 10 digits)
Resolution: 1V
Input Resistance: About 10MΩ
Frequency range: 40Hz – 400Hz
Max. Input Voltage: 600V DC or 600V RMS AC
AC Current: 600A
Accuracy: ±(2.5% + 10 digits)
Resolution: 0.1A
Frequency Range: 50Hz ~ 60Hz
Max. Input Current: 120% of full scale, less than 60 seconds
Accuracy: ±(2.5% + 10 digits)
Resolution: 0.1A
Frequency Range: 50Hz ~ 60Hz
Max. Input Current: 120% of full scale, less than 60 seconds
Resistance: 40MΩ
Accuracy: ±(2% + 5 digits)
Resolution: 10kΩ
( Overload Protection: 600V DC or 600V RMS AC )
Accuracy: ±(2% + 5 digits)
Resolution: 10kΩ
( Overload Protection: 600V DC or 600V RMS AC )
Capacitance: 40mF
Accuracy: ±(4% + 3 digits )
Resolution: 10uF
( Overload Protection: 600V DC or 600V RMS AC )
Accuracy: ±(4% + 3 digits )
Resolution: 10uF
( Overload Protection: 600V DC or 600V RMS AC )
Diode test: Forward voltage drop value (open circuit voltage about 2.3V)
Continuity test: Beeper sounds when resistance is less than 50 OHMS (open circuit voltage about 2.1V)
Jaw size: 26 mm.
FEATURES
Display: LCD
4000 Counts
3 ¾ Digits
AC & DC Voltage
AC Current
True-RMS
Resistance
Capacitance
Jaw Open Size: 26mm
NCV
Diode Test
Continuity Buzzer
Overload Protection
Shock Proof Protection
Input Impedence
Backlight
Torch
Auto Power Off
Low Battery Display
SKU: n/a
CLAMPMETER
BEETECH B-6013 600A AC DUAL RE…
SPECIFICATIONS
DC Voltage: 600V
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
Input Resistance: About 10MΩ
Max. Input Voltage: 600V DC
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
Input Resistance: About 10MΩ
Max. Input Voltage: 600V DC
AC Voltage: 600V
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
Input Resistance: About 10MΩ
Frequency range: 40Hz – 400Hz -Response: True RMS
Max. Input Voltage: 600V AC (effective value)
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
Input Resistance: About 10MΩ
Frequency range: 40Hz – 400Hz -Response: True RMS
Max. Input Voltage: 600V AC (effective value)
AC Current: 600A
Accuracy: ±(3.0% + 6 digits)
Resolution: 0.1A
Frequency Range: 40Hz ~ 400Hz – Response: average value.
Max. Input Current: 600A DC
Max. Input Current: 600A AC
Accuracy: ±(3.0% + 6 digits)
Resolution: 0.1A
Frequency Range: 40Hz ~ 400Hz – Response: average value.
Max. Input Current: 600A DC
Max. Input Current: 600A AC
Resistance: 60MΩ
Accuracy: ±(1.2% + 3 digits)
Resolution: 0.1mΩ
( Overload Protection: 250V DC or 250VAC )
Accuracy: ±(1.2% + 3 digits)
Resolution: 0.1mΩ
( Overload Protection: 250V DC or 250VAC )
Capacitance: 60mF
Accuracy: ±(4.5% + 5 digits )
Resolution: 0.01MF
( Overload Protection: 600V DC or 600V AC )
Accuracy: ±(4.5% + 5 digits )
Resolution: 0.01MF
( Overload Protection: 600V DC or 600V AC )
Frequency: 10 mHz
Accuracy: ±(0.5% + 2 digits )
Resolution: 0.001 Mhz
Accuracy: ±(0.5% + 2 digits )
Resolution: 0.001 Mhz
Diode Test: Display approximate for ward voltage of diode:
Forward DC Current is about 1mA
Reverse DC voltage is about 3.3V
Forward DC Current is about 1mA
Reverse DC voltage is about 3.3V
Continuity: Beeper sounds when resistance is less than 50 OHMS (open circuit voltage about 2.1V)
Jaw size: 30 mm
FEATURES
Display: LCD
6000 Counts
3 5/6 Digits
AC & DC Voltage
AC Current
True-RMS
Resistance
Capacitance
Frequency
Temperature
Jaw Open Size: 30mm
NCV
Diode Test
Continuity Buzzer
Overload Protection
Shock Proof Protection
Backlight
Torch
Auto Power Off
Low Battery Display
SKU: n/a
CLAMPMETER
BEETECH B-6018 SMART 600A AC D…
SPECIFICATIONS
DC Voltage: 600V
Accuracy: ±(0.5% + 3 digits)
Resolution: 0.1V
In AUTO mode, input voltage ranges from 0.8V to 600V DC
Input voltage range in mV mode: 0.0mV ~ 600 mV DC
Accuracy: ±(0.5% + 3 digits)
Resolution: 0.1V
In AUTO mode, input voltage ranges from 0.8V to 600V DC
Input voltage range in mV mode: 0.0mV ~ 600 mV DC
AC Voltage(T-RMS): 600V
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
In AUTO mode, input voltage ranges from 0.8V to 600V AC
Input Voltage range in mV mode: 0.0mV to 600mV AC
Frequency: 40Hz ~ 1000Hz
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
In AUTO mode, input voltage ranges from 0.8V to 600V AC
Input Voltage range in mV mode: 0.0mV to 600mV AC
Frequency: 40Hz ~ 1000Hz
AC Current: 600A
Accuracy: ±(1.0% + 8 digits)
Resolution: 0.1A
Frequency Range: 40Hz ~ 400Hz – Response: average value
Min. Input Current: 0.8A AC
Max. Input Current: 600A AC
Accuracy: ±(1.0% + 8 digits)
Resolution: 0.1A
Frequency Range: 40Hz ~ 400Hz – Response: average value
Min. Input Current: 0.8A AC
Max. Input Current: 600A AC
Resistance: 60MΩ
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1MΩ
Open Circuit voltage: approx.. 0.4V
Overload Protection: 600V DC or AC (valid value)
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1MΩ
Open Circuit voltage: approx.. 0.4V
Overload Protection: 600V DC or AC (valid value)
Capacitance: 60 mF
Accuracy: ±(2.5% + 20 digits)
Resolution: 0.001 mF
Overload Protection: 600V DC or AC Valid value
Accuracy: ±(2.5% + 20 digits)
Resolution: 0.001 mF
Overload Protection: 600V DC or AC Valid value
Frequency: 10Mhz
Accuracy: ±(2.5% + 20 digits)
Resolution: 0.001 Mhz
Measuring range: 1Hz ~ 10Mhz
Input signal pattern: >0.8V AC current (RMS)
Accuracy: ±(2.5% + 20 digits)
Resolution: 0.001 Mhz
Measuring range: 1Hz ~ 10Mhz
Input signal pattern: >0.8V AC current (RMS)
Diode Test: Display approximate for ward voltage of diode
Continuity: Built in Buzzer will be sounded if resistance is less than 50 Ohms
FEATURES
Display: LCD
6000 Counts
3 5/6 Digits
AC & DC Voltage
AC Current
True-RMS
Resistance
Capacitance
Frequency
Temperature
Jaw Open Size: 30mm
NCV
Diode Test
Continuity Buzzer
Overload Protection
Shock Proof Protection
Input Impedence
Backlight
Torch
Auto Power Off
Low Battery Display
SKU: n/a
CLAMPMETER
BEETECH B-6023 600V 600A AC/DC…
SPECIFICATIONS
DC Voltage: 600V
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
Response average input impedance: 10MΩ
Max. Input Voltage: 600V DC
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
Response average input impedance: 10MΩ
Max. Input Voltage: 600V DC
AC Voltage: 600V
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
Input Resistance: 10MΩ
Frequency range: 40Hz – 400Hz
Response: True RM
Max. Input Voltage: 600V DC (effective value)
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
Input Resistance: 10MΩ
Frequency range: 40Hz – 400Hz
Response: True RM
Max. Input Voltage: 600V DC (effective value)
AC Current: 600A
Accuracy: ±(3.0% + 6 digits)
Resolution: 0.1A
Frequency Range: 40Hz ~ 400Hz Response: Avg. Value
Max. Input Current: 600A AC
Accuracy: ±(3.0% + 6 digits)
Resolution: 0.1A
Frequency Range: 40Hz ~ 400Hz Response: Avg. Value
Max. Input Current: 600A AC
AC Current: 600A
Accuracy: ±(2.5% + 8 digits)
Resolution: 0.1A
Max. Input Current: 600A DC
Accuracy: ±(2.5% + 8 digits)
Resolution: 0.1A
Max. Input Current: 600A DC
Resistance: 60MΩ
Accuracy: ±(1.2% + 3 digits)
Resolution: 0.1MΩ
Overload Protection: 250V DC or AC (valid value)
Open Circuit Voltage: Approx. 0.4V
Accuracy: ±(1.2% + 3 digits)
Resolution: 0.1MΩ
Overload Protection: 250V DC or AC (valid value)
Open Circuit Voltage: Approx. 0.4V
Capacitance: 60mF
Accuracy: ±(4.5% + 5 digits)
Resolution: 0.01mF
Overload Protection: 250V DC or AC (valid value)
Accuracy: ±(4.5% + 5 digits)
Resolution: 0.01mF
Overload Protection: 250V DC or AC (valid value)
Frequency: 10Mhz
Accuracy: ±(0.5% + 2 digits)
Resolution: 0.001Mhz
Accuracy: ±(0.5% + 2 digits)
Resolution: 0.001Mhz
Diode Test: 00.1V Display approximate for ward voltage of Diode.
• Forward DC Current is about 1mA.
• Reverse DC voltage is about 3.3V
• Overload Protection:250V DC or AC (valid value)
• Forward DC Current is about 1mA.
• Reverse DC voltage is about 3.3V
• Overload Protection:250V DC or AC (valid value)
Continuity Test: 0.1Ω Built-in buzzer will be sounded if resistance is less than 50Ω
• Overload Protection:250V DC or AC (valid value)
• Overload Protection:250V DC or AC (valid value)
FEATURES
Display: LCD
6000 Counts
3 5/6 Digits
AC & DC Voltage
AC & DC Current
True-RMS
Resistance
Capacitance
Frequency
Temperature
Jaw Open Size: 30mm
NCV
Diode Test
Continuity Buzzer
Overload Protection
Shock Proof Protection
Input Impedence
Backlight
Torch
Auto Power Off
Low Battery Display
SKU: n/a
Recently Viewed
BREATH ALCOHOL ANALYSER
AL-6000
SPECIFICATIONS
Normal Mode : 0.00 to 4.00 %0 or 0.000 to 0.400%BAC or 0.00 to 2.00 mg/l BrAC by LED display
Fast (Screening) Mode: “0”, “Low” and “High” 3 steps
Fast (Screening) Mode: “0”, “Low” and “High” 3 steps
Sensor : Semiconductor type alcohol sensor
Accuracy : 0.01%BAC at 0.05%BAC
Power : Two 1.5V “AA” size alkaline batteries I Auto Power off
Weight : 115g (Including Batteries)
Dimensions : 124 (height) X 56 (width) X 41 (thickness) MAX
Audible Warnings : 3 steps beep warning of alcohol Detection with LED display
Colour : Silver
SKU: n/a
POWER SUPPLY
BEETECH 3005 30V DC REGULATED …
SPECIFICATION
TECHNICAL SPECIFICATION
Voltage output range : 0 – 30V
Current output range : 0 – 5A
Current and voltage display model : A means pointer display, D means LED display
Display precision Pointer display : ± 2.5%
Digital display : ± 1% ± 1 word
PARAMETER SPECIFICATION
Input voltage: AC 220V ± 10% (switch to choose) 50/60Hz
Operating condition : -10˚C ~ 40˚C, ≤ 90%RH
Storage condition : -10˚C ~ 40˚C, ≤ 80%RH
Voltage stability : ≤ 0.01% + 2mV
Load stability : ≤ 0.01% + 2mV
Recovery time : ≤ 100µs
Ripple and noise : ≤ 1mVrms (effective value)
Temperature coefficient : ≤ 200PPM˚C
FEATURES
DC Regulated Power Supply is an easy to use, low ripple high regulation precision instrument.
It is particularly suitable for experimental development and low voltage applications.
Its unique feature is over load protection, which makes it a safe power source for testing of electronic equipment.
The power supply’s output is floating i.e., either the positive or negative output is connected to the chasis or ground.
Thus the power supply may be used as a positive or negative DC source by grounding -ve or +ve terminal respectively.
SKU: n/a
LUX METER
BEETECH B-101 DIGITAL LUX METE…
SPECIFICATIONS
Display : 4 Digits color LCD display Measuring
Range : 0 Lux ~ 2,00,000 Lux / 0 Fc ~ 20,000 Fc (Foot Candles)
Accuracy : ±3% rdg ± 8d (<10,000 Lux) ; ± 4% rdg ± 10d (>10,000 Lux)
Temperature Range : -20 ~ 70°C / 4°F ~ 158°F |
Temperature Accuracy : ±1.5°C / 2.7°F
Spectral Response : CIE photopic (CIE Human Eye Response Curve)
Spectral Accuracy : CIE Vλ function (f1’ ≤ 6% f2’ ≤ 2%)
Over Range Indication : LCD Display “-OL-” or “-LO”
Sampling Rate : 2 Times / Second
Photo Detector : Silicon photo-diode with spectral response filter
Lux Resolution : <1000 : 0.1 ; > 1000 : 1
Temperature Resolution : 0.1
Operating Conditions : -20°C ~ 60°C, -4°F ~ 140°F, 10%RH ~ 90%RH
Storage Conditions : -20°C ~ 60°C, -4°F ~ 140°F, 10%RH ~ 75%RH
Power Supply : 3*1.5V “AAA” batteries
Battery Life : Approximately 60 hours
FEATURES
0 to 2,00,000 Lux / 20,000 Foot Candles
Auto Range Measurement
Measures both Lux and Foot-Candles
High Accuracy
Rapid Response Sampling Time
Temperature Measurement in °C / °F
Color LCD Display with backlight
Over Range Indication
Low Battery Indication
MAX / MIN / DATA HOLD
Enable / Disable auto power off
APPLICATIONS
Beetech B-101 is widely used in/by:
• Photographers
• Researchers
• Students
• Security Department
• Warehouse & Factories
• Art Galleries & Museum & Stadiums
• Hospital
• Educational Institutions & Libraries
• Public places
• Photographers
• Researchers
• Students
• Security Department
• Warehouse & Factories
• Art Galleries & Museum & Stadiums
• Hospital
• Educational Institutions & Libraries
• Public places
SKU: n/a
ANEMOMETER
BEETECH B-201 DIGITAL THERMO-A…
SPECIFICATIONS
AIR VELOCITY RANGE
RANGE : 0.4~30.0 m/s
RESOLUTION :0.1 m/s
ACCURACY : ±3%±0.3m/s
RANGE : 1.4~108 km/h
RESOLUTION : 0.1 km/h
ACCURACY : ±3%±1.0km/H
RANGE : 0.9~67.0 f Mph
RESOLUTION : 0.1 Mph
ACCURACY : ±3%±0.4 Mph
RANGE : 0.8~58.0 Knots
RESOLUTION : 0.1 Knots
ACCURACY : ±3%±0.4 Knots
RANGE : 0.8~58.0 Knots
RESOLUTION : 0.1 Knots
ACCURACY : ±3%±0.4 Knots
Temperature Range : -20~70°C/-4~158°F
Temperature Accuracy : ±1.5°C/2.7°F
Temperature Resolution : 0.1
Data Update : 300ms
Operating Conditions : -20°C ~ 60°C, -4°F ~ 140°F, 10%RH ~ 90%RH
Storage Conditions : -20°C ~ 60°C, -4°F ~ 140°F, 10%RH ~ 75%RH
Power Supply : 3*1.5V “AAA” batteries
Battery Life : Approximately 60 hours
PRODUCT FEATURES
• Selectable measurement units:
1. m/s
2. Ft/min
3. MPH
4. Km/hr
5. Knots
• Fast Sampling Rate
• Max / Min / Data Hold
• Over Range Indication Low Battery Indication
• Enable / Disable Auto Power Off
APPLICATION
Beetech B-201 is widely used in/by:
• Weather Stations
• Drone users
• Iron and Steel Industry
• HVAC Industry
• Heating Systems
• Mining Industry
• Fan Manufacturers
• Sporting events
• Petrochemical Industry
• Long Range Shooters
• Pilots
• Sky divers
• Aero-dynamics
SKU: n/a
MULTIMETER
BEETECH B-511 DIGITAL SMART MU…
SPECIFICATIONS
DC Voltage:
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V
AC Voltage:
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V
DC Current:
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A
AC Current:
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A
Capacitance:
Range: 4 mF
Accuracy: ± 5% + 3 digits
Resolution: 0.001 mF
Range: 4 mF
Accuracy: ± 5% + 3 digits
Resolution: 0.001 mF
Frequency:
Range: 400 kHz
Accuracy: ± 1.0% + 3 digits
Resolution: 0.1 kHz
Range: 400 kHz
Accuracy: ± 1.0% + 3 digits
Resolution: 0.1 kHz
Resistance:
Range: 40 MΩ
Accuracy: ± 2.0% + 5 digits
Resolution: 0.01 MΩ
Range: 40 MΩ
Accuracy: ± 2.0% + 5 digits
Resolution: 0.01 MΩ
Temperature:
Operational: -10 ~ 50°C
Working: 0 ~ 40°C
Operational: -10 ~ 50°C
Working: 0 ~ 40°C
SKU: n/a
CLAMPMETER
BEETECH B-6010 600A AC TRUE RM…
SPECIFICATIONS
DC Voltage: 600V
Accuracy: ±(1% + 2 digits)
Resolution: 1V
Input Resistance: About 10MΩ
Max. Input Voltage: 600V DC or 600V RMS AC
Accuracy: ±(1% + 2 digits)
Resolution: 1V
Input Resistance: About 10MΩ
Max. Input Voltage: 600V DC or 600V RMS AC
AC Voltage: 600V
Accuracy: ±(1.2% + 10 digits)
Resolution: 1V
Input Resistance: About 10MΩ
Frequency range: 40Hz – 400Hz
Max. Input Voltage: 600V DC or 600V RMS AC
Accuracy: ±(1.2% + 10 digits)
Resolution: 1V
Input Resistance: About 10MΩ
Frequency range: 40Hz – 400Hz
Max. Input Voltage: 600V DC or 600V RMS AC
AC Current: 600A
Accuracy: ±(2.5% + 10 digits)
Resolution: 0.1A
Frequency Range: 50Hz ~ 60Hz
Max. Input Current: 120% of full scale, less than 60 seconds
Accuracy: ±(2.5% + 10 digits)
Resolution: 0.1A
Frequency Range: 50Hz ~ 60Hz
Max. Input Current: 120% of full scale, less than 60 seconds
Resistance: 40MΩ
Accuracy: ±(2% + 5 digits)
Resolution: 10kΩ
( Overload Protection: 600V DC or 600V RMS AC )
Accuracy: ±(2% + 5 digits)
Resolution: 10kΩ
( Overload Protection: 600V DC or 600V RMS AC )
Capacitance: 40mF
Accuracy: ±(4% + 3 digits )
Resolution: 10uF
( Overload Protection: 600V DC or 600V RMS AC )
Accuracy: ±(4% + 3 digits )
Resolution: 10uF
( Overload Protection: 600V DC or 600V RMS AC )
Diode test: Forward voltage drop value (open circuit voltage about 2.3V)
Continuity test: Beeper sounds when resistance is less than 50 OHMS (open circuit voltage about 2.1V)
Jaw size: 26 mm.
FEATURES
Display: LCD
4000 Counts
3 ¾ Digits
AC & DC Voltage
AC Current
True-RMS
Resistance
Capacitance
Jaw Open Size: 26mm
NCV
Diode Test
Continuity Buzzer
Overload Protection
Shock Proof Protection
Input Impedence
Backlight
Torch
Auto Power Off
Low Battery Display
SKU: n/a
CLAMPMETER
BEETECH B-6013 600A AC DUAL RE…
SPECIFICATIONS
DC Voltage: 600V
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
Input Resistance: About 10MΩ
Max. Input Voltage: 600V DC
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
Input Resistance: About 10MΩ
Max. Input Voltage: 600V DC
AC Voltage: 600V
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
Input Resistance: About 10MΩ
Frequency range: 40Hz – 400Hz -Response: True RMS
Max. Input Voltage: 600V AC (effective value)
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
Input Resistance: About 10MΩ
Frequency range: 40Hz – 400Hz -Response: True RMS
Max. Input Voltage: 600V AC (effective value)
AC Current: 600A
Accuracy: ±(3.0% + 6 digits)
Resolution: 0.1A
Frequency Range: 40Hz ~ 400Hz – Response: average value.
Max. Input Current: 600A DC
Max. Input Current: 600A AC
Accuracy: ±(3.0% + 6 digits)
Resolution: 0.1A
Frequency Range: 40Hz ~ 400Hz – Response: average value.
Max. Input Current: 600A DC
Max. Input Current: 600A AC
Resistance: 60MΩ
Accuracy: ±(1.2% + 3 digits)
Resolution: 0.1mΩ
( Overload Protection: 250V DC or 250VAC )
Accuracy: ±(1.2% + 3 digits)
Resolution: 0.1mΩ
( Overload Protection: 250V DC or 250VAC )
Capacitance: 60mF
Accuracy: ±(4.5% + 5 digits )
Resolution: 0.01MF
( Overload Protection: 600V DC or 600V AC )
Accuracy: ±(4.5% + 5 digits )
Resolution: 0.01MF
( Overload Protection: 600V DC or 600V AC )
Frequency: 10 mHz
Accuracy: ±(0.5% + 2 digits )
Resolution: 0.001 Mhz
Accuracy: ±(0.5% + 2 digits )
Resolution: 0.001 Mhz
Diode Test: Display approximate for ward voltage of diode:
Forward DC Current is about 1mA
Reverse DC voltage is about 3.3V
Forward DC Current is about 1mA
Reverse DC voltage is about 3.3V
Continuity: Beeper sounds when resistance is less than 50 OHMS (open circuit voltage about 2.1V)
Jaw size: 30 mm
FEATURES
Display: LCD
6000 Counts
3 5/6 Digits
AC & DC Voltage
AC Current
True-RMS
Resistance
Capacitance
Frequency
Temperature
Jaw Open Size: 30mm
NCV
Diode Test
Continuity Buzzer
Overload Protection
Shock Proof Protection
Backlight
Torch
Auto Power Off
Low Battery Display
SKU: n/a
CLAMPMETER
BEETECH B-6018 SMART 600A AC D…
SPECIFICATIONS
DC Voltage: 600V
Accuracy: ±(0.5% + 3 digits)
Resolution: 0.1V
In AUTO mode, input voltage ranges from 0.8V to 600V DC
Input voltage range in mV mode: 0.0mV ~ 600 mV DC
Accuracy: ±(0.5% + 3 digits)
Resolution: 0.1V
In AUTO mode, input voltage ranges from 0.8V to 600V DC
Input voltage range in mV mode: 0.0mV ~ 600 mV DC
AC Voltage(T-RMS): 600V
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
In AUTO mode, input voltage ranges from 0.8V to 600V AC
Input Voltage range in mV mode: 0.0mV to 600mV AC
Frequency: 40Hz ~ 1000Hz
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
In AUTO mode, input voltage ranges from 0.8V to 600V AC
Input Voltage range in mV mode: 0.0mV to 600mV AC
Frequency: 40Hz ~ 1000Hz
AC Current: 600A
Accuracy: ±(1.0% + 8 digits)
Resolution: 0.1A
Frequency Range: 40Hz ~ 400Hz – Response: average value
Min. Input Current: 0.8A AC
Max. Input Current: 600A AC
Accuracy: ±(1.0% + 8 digits)
Resolution: 0.1A
Frequency Range: 40Hz ~ 400Hz – Response: average value
Min. Input Current: 0.8A AC
Max. Input Current: 600A AC
Resistance: 60MΩ
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1MΩ
Open Circuit voltage: approx.. 0.4V
Overload Protection: 600V DC or AC (valid value)
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1MΩ
Open Circuit voltage: approx.. 0.4V
Overload Protection: 600V DC or AC (valid value)
Capacitance: 60 mF
Accuracy: ±(2.5% + 20 digits)
Resolution: 0.001 mF
Overload Protection: 600V DC or AC Valid value
Accuracy: ±(2.5% + 20 digits)
Resolution: 0.001 mF
Overload Protection: 600V DC or AC Valid value
Frequency: 10Mhz
Accuracy: ±(2.5% + 20 digits)
Resolution: 0.001 Mhz
Measuring range: 1Hz ~ 10Mhz
Input signal pattern: >0.8V AC current (RMS)
Accuracy: ±(2.5% + 20 digits)
Resolution: 0.001 Mhz
Measuring range: 1Hz ~ 10Mhz
Input signal pattern: >0.8V AC current (RMS)
Diode Test: Display approximate for ward voltage of diode
Continuity: Built in Buzzer will be sounded if resistance is less than 50 Ohms
FEATURES
Display: LCD
6000 Counts
3 5/6 Digits
AC & DC Voltage
AC Current
True-RMS
Resistance
Capacitance
Frequency
Temperature
Jaw Open Size: 30mm
NCV
Diode Test
Continuity Buzzer
Overload Protection
Shock Proof Protection
Input Impedence
Backlight
Torch
Auto Power Off
Low Battery Display
SKU: n/a
CLAMPMETER
BEETECH B-6023 600V 600A AC/DC…
SPECIFICATIONS
DC Voltage: 600V
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
Response average input impedance: 10MΩ
Max. Input Voltage: 600V DC
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
Response average input impedance: 10MΩ
Max. Input Voltage: 600V DC
AC Voltage: 600V
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
Input Resistance: 10MΩ
Frequency range: 40Hz – 400Hz
Response: True RM
Max. Input Voltage: 600V DC (effective value)
Accuracy: ±(0.8% + 3 digits)
Resolution: 0.1V
Input Resistance: 10MΩ
Frequency range: 40Hz – 400Hz
Response: True RM
Max. Input Voltage: 600V DC (effective value)
AC Current: 600A
Accuracy: ±(3.0% + 6 digits)
Resolution: 0.1A
Frequency Range: 40Hz ~ 400Hz Response: Avg. Value
Max. Input Current: 600A AC
Accuracy: ±(3.0% + 6 digits)
Resolution: 0.1A
Frequency Range: 40Hz ~ 400Hz Response: Avg. Value
Max. Input Current: 600A AC
AC Current: 600A
Accuracy: ±(2.5% + 8 digits)
Resolution: 0.1A
Max. Input Current: 600A DC
Accuracy: ±(2.5% + 8 digits)
Resolution: 0.1A
Max. Input Current: 600A DC
Resistance: 60MΩ
Accuracy: ±(1.2% + 3 digits)
Resolution: 0.1MΩ
Overload Protection: 250V DC or AC (valid value)
Open Circuit Voltage: Approx. 0.4V
Accuracy: ±(1.2% + 3 digits)
Resolution: 0.1MΩ
Overload Protection: 250V DC or AC (valid value)
Open Circuit Voltage: Approx. 0.4V
Capacitance: 60mF
Accuracy: ±(4.5% + 5 digits)
Resolution: 0.01mF
Overload Protection: 250V DC or AC (valid value)
Accuracy: ±(4.5% + 5 digits)
Resolution: 0.01mF
Overload Protection: 250V DC or AC (valid value)
Frequency: 10Mhz
Accuracy: ±(0.5% + 2 digits)
Resolution: 0.001Mhz
Accuracy: ±(0.5% + 2 digits)
Resolution: 0.001Mhz
Diode Test: 00.1V Display approximate for ward voltage of Diode.
• Forward DC Current is about 1mA.
• Reverse DC voltage is about 3.3V
• Overload Protection:250V DC or AC (valid value)
• Forward DC Current is about 1mA.
• Reverse DC voltage is about 3.3V
• Overload Protection:250V DC or AC (valid value)
Continuity Test: 0.1Ω Built-in buzzer will be sounded if resistance is less than 50Ω
• Overload Protection:250V DC or AC (valid value)
• Overload Protection:250V DC or AC (valid value)
FEATURES
Display: LCD
6000 Counts
3 5/6 Digits
AC & DC Voltage
AC & DC Current
True-RMS
Resistance
Capacitance
Frequency
Temperature
Jaw Open Size: 30mm
NCV
Diode Test
Continuity Buzzer
Overload Protection
Shock Proof Protection
Input Impedence
Backlight
Torch
Auto Power Off
Low Battery Display
SKU: n/a