Deals of The Day
Ends in:
PROBES
HIOKI P2000 DC High Voltage Pr…
SPECIFICATIONS
Maximum Input Voltage : DC 2000 V
Maximum rated line-to-ground voltage
1000 V (Measurement Category IV), Anticipated transient overvoltage 12000 V
2000 V (Measurement Category III), Anticipated transient overvoltage 15000 V
1000 V (Measurement Category IV), Anticipated transient overvoltage 12000 V
2000 V (Measurement Category III), Anticipated transient overvoltage 15000 V
Input Resistance : 20 MΩ ±5.0% (between INPUT H and INPUT L, when OUTPUT terminal is open)
Overload Protection :
2200 V DC/2200 V AC (applied for 1 minute) (between INPUT H and INPUT L)
600 V DC/600 V AC (applied for 1 minute) (between OUTPUT H and OUTPUT L)
2200 V DC/2200 V AC (applied for 1 minute) (between INPUT H and INPUT L)
600 V DC/600 V AC (applied for 1 minute) (between OUTPUT H and OUTPUT L)
Output Terminal : 4 mm banana terminal
Operating Temperature Range : -25°C to 65°C (-13°F to 149°F)
Operating Humidity Range : −25°C to 40°C (−13°F to 104°F): 80% RH or less (non-condensing)
40°C to 65°C (104°F to 149°F): Linearly reduces from 80% RH or less at 40°C (104°F) to 25% RH or less at 65°C (149°F) (non-condensing)
40°C to 65°C (104°F to 149°F): Linearly reduces from 80% RH or less at 40°C (104°F) to 25% RH or less at 65°C (149°F) (non-condensing)
Storage temperature and humidity range : -30°C to 70°C (-22°F to 158°F) 90% RH or less (non-condensing)
Standards : EN 61010
Included Accessories : Connection Cable Set L4943 ×1, Strap with buckle ×2, Strap ×1, Carrying Case C0205 ×1, Instruction Manual ×1, Operating Precautions ×1
FEATURES
Enables high voltage measurement up to CAT Ⅲ 2000 V
Safely measure solar installations like the mega-solar without interrupting the grid
Connects to compatible Hioki clamp meters and digital multimeters (DMMs)
ACCURACY FOR COMPATIBLE INSTRUMENTS
DT-4261 :
Range 600.0 V: Combined accuracy ±0.5% rdg ±0.2 V
Range 2000 V: Combined accuracy ±0.5% rdg ±5 V
Range 600.0 V: Combined accuracy ±0.5% rdg ±0.2 V
Range 2000 V: Combined accuracy ±0.5% rdg ±5 V
CM4141-50 ; CM4371-50 ; CM4373-50 ; CM4375-50 :
Range 600.0 V: Combined accuracy ±1.0% rdg ±0.3 V
Range 2000 V: Combined accuracy ±1.0% rdg ±3 V
Range 600.0 V: Combined accuracy ±1.0% rdg ±0.3 V
Range 2000 V: Combined accuracy ±1.0% rdg ±3 V
DT-4282 ; DT-4281 :
Range 60.000 V: Combined accuracy ±0.8% rdg ±0.002 V (output rate 1/10)
Range 600.00 V: Combined accuracy ±0.8% rdg ±0.02 V (output rate 1/10)
Range 60.000 V: Combined accuracy ±0.8% rdg ±0.002 V (output rate 1/10)
Range 600.00 V: Combined accuracy ±0.8% rdg ±0.02 V (output rate 1/10)
DT-4252 ; DT-4253 :
Range 60.00 V: Combined accuracy ±1.2% rdg ±0.05 V (output rate 1/10)
Range 600.0 V: Combined accuracy ±1.2% rdg ±0.5 V (output rate 1/10)
Range 60.00 V: Combined accuracy ±1.2% rdg ±0.05 V (output rate 1/10)
Range 600.0 V: Combined accuracy ±1.2% rdg ±0.5 V (output rate 1/10)
DT-4255 ; DT-4256 :
Range 60.00 V: Combined accuracy ±1.2% rdg ±0.03 V (output rate 1/10)
Range 600.0 V: Combined accuracy ±1.2% rdg ±0.3 V (output rate 1/10)
Range 60.00 V: Combined accuracy ±1.2% rdg ±0.03 V (output rate 1/10)
Range 600.0 V: Combined accuracy ±1.2% rdg ±0.3 V (output rate 1/10)
SKU: n/a
POWER SUPPLY
BEETECH 3005 30V DC REGULATED …
SPECIFICATION
TECHNICAL SPECIFICATION
Voltage output range : 0 – 30V
Current output range : 0 – 5A
Current and voltage display model : A means pointer display, D means LED display
Display precision Pointer display : ± 2.5%
Digital display : ± 1% ± 1 word
PARAMETER SPECIFICATION
Input voltage: AC 220V ± 10% (switch to choose) 50/60Hz
Operating condition : -10˚C ~ 40˚C, ≤ 90%RH
Storage condition : -10˚C ~ 40˚C, ≤ 80%RH
Voltage stability : ≤ 0.01% + 2mV
Load stability : ≤ 0.01% + 2mV
Recovery time : ≤ 100µs
Ripple and noise : ≤ 1mVrms (effective value)
Temperature coefficient : ≤ 200PPM˚C
FEATURES
DC Regulated Power Supply is an easy to use, low ripple high regulation precision instrument.
It is particularly suitable for experimental development and low voltage applications.
Its unique feature is over load protection, which makes it a safe power source for testing of electronic equipment.
The power supply’s output is floating i.e., either the positive or negative output is connected to the chasis or ground.
Thus the power supply may be used as a positive or negative DC source by grounding -ve or +ve terminal respectively.
SKU: n/a
POWER GUARD
MECO PG 09 20A POWERGUARD
SPECIFICATIONS :
RMS VOLTAGE : 240V AC (Nominal) (195V ~ 265Vrms)
RMS CURRENT : (0.110 ~ 20.00) Arms
ACTIVE POWER : (0.026 ~ 4.800) KW,@240VAC (KW)
APPARENT POWER : (0.026 ~ 4.800) KVA,@240VAC (KVA)
REACTIVE POWER : (0.026 ~ 4.800) KVAr,@240VAC (KVAr)
POWER FACTOR : (0.026 ~ 0.120) KW,(0.120 ~ 4.800) KW
LINE FREQUENCY : 45.00 ~ 55.00 Hz
ACTIVE ENERGY : 000000 ~ 999999 KWh
FEATURES :
Three Pin Socket and Plug Suitable for Indian Socket
Large Dual Row LCD Display with Backlight and Annunciators
Memory Retention (KWh, EUT)
Simple, Easy and Accurate
Continuous Measurements
Counts CO2 generated by Electrical Equiptment (0.555kg CO2 is generated by using 1 KWh Energy)
SKU: n/a
pH/EC/TDS/TEMP METER
HM AP-2 AquaPro Water Quality …
HM Digital’s AquaPro series, is a handheld water quality tester which, with a modern design is perfect for today’s tech-savvy and health-conscience consumer. The AquaPro digital water testers are the next generation for today’s modern kitchen.
SKU: n/a
PH Meter
HANNA HI98107 pHep Waterproof …
Hanna’s HI98107 pHep® pH tester displays readings with 0.1 pH resolution, ±0.1 pH accuracy, and a range from 0.0 to 14.0 pH. This rugged, reliable, ergonomic, pocket-sized tester is designed for use in the lab or fields while keeping things simple with a two-button operation.
Extractable Cloth Junction to Extend pH Electrode Life
Has Automatic Temperature Compensation
For Use in Fresh Water
SKU: n/a
MULTIMETER
BEETECH B-511 DIGITAL SMART MU…
SPECIFICATIONS
DC Voltage:
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V
AC Voltage:
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V
DC Current:
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A
AC Current:
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A
Capacitance:
Range: 4 mF
Accuracy: ± 5% + 3 digits
Resolution: 0.001 mF
Range: 4 mF
Accuracy: ± 5% + 3 digits
Resolution: 0.001 mF
Frequency:
Range: 400 kHz
Accuracy: ± 1.0% + 3 digits
Resolution: 0.1 kHz
Range: 400 kHz
Accuracy: ± 1.0% + 3 digits
Resolution: 0.1 kHz
Resistance:
Range: 40 MΩ
Accuracy: ± 2.0% + 5 digits
Resolution: 0.01 MΩ
Range: 40 MΩ
Accuracy: ± 2.0% + 5 digits
Resolution: 0.01 MΩ
Temperature:
Operational: -10 ~ 50°C
Working: 0 ~ 40°C
Operational: -10 ~ 50°C
Working: 0 ~ 40°C
SKU: n/a
MOISTURE METER
BEETECH B-M2 Digital Moisture …
SPECIFICATIONS
Electrode Length : 10 mm
Electrodes : Replaceable
Moisture Range : Wood : 5 ~ 70% RH , Building Material : 0.1~2.4% RH
Temperature Range : -20 ~ 70°C / -4 ~ 122°F
Moisture Accuracy –
Wood : 5 ~ 30% : ±1%
30 ~ 60% : ±2%
60 ~ 70% : ±4%
Other: ±5%
Wood : 5 ~ 30% : ±1%
30 ~ 60% : ±2%
60 ~ 70% : ±4%
Other: ±5%
Temperature Accuracy : -20 ~ 70°C / -4 ~ 158°F : ±1.5°C / 2.7°F
Auto Power Off : After 120 seconds of inactivity
Operating Ambient Temperature : 0 ~ 50°C/32~122°F
Operating Ambient Humidity : 0 ~ 85% RH
Dimensions : 163 X 62 X 30 mm
Weight : 153 g
Accessories : User Manual , 9V Battery, Pouch with Box packing
FEATURES
Big LCD display with backlight.
Replaceable electrode pins .
Various materials measurement.
Analog bar and digital display values at same time.
Selectable measurement for wood or other building material.
Simultaneous measurement of moisture & temperature
SKU: n/a
METAL DETECTOR
BEETECH BMD-100 METAL DETECTOR
SPECIFICATIONS
Colour indication
RED – Metal Detection
GREEN – Power On
Clear RED – Charge indication
Sensitivity 0.1gm of any metal with minimum 6mm diameter can detect from 20 mm distance.
FEATURES
Indication audio buzzer
Automatic setting
Inbuilt battery charger
Light weight with strong ABS Body
Ultra sensitive with Instant operation
Search Area: 90 sq.mm
Detects all types of ferrous and non-ferrous Metal Alloys
Audio and Visual Indication
9 V Rechargeable NI-MN Battery.
Dimension: 330 (l) X50 (w) X35 (h)
SKU: n/a
LUX METER
BEETECH B-101 DIGITAL LUX METE…
SPECIFICATIONS
Display : 4 Digits color LCD display Measuring
Range : 0 Lux ~ 2,00,000 Lux / 0 Fc ~ 20,000 Fc (Foot Candles)
Accuracy : ±3% rdg ± 8d (<10,000 Lux) ; ± 4% rdg ± 10d (>10,000 Lux)
Temperature Range : -20 ~ 70°C / 4°F ~ 158°F |
Temperature Accuracy : ±1.5°C / 2.7°F
Spectral Response : CIE photopic (CIE Human Eye Response Curve)
Spectral Accuracy : CIE Vλ function (f1’ ≤ 6% f2’ ≤ 2%)
Over Range Indication : LCD Display “-OL-” or “-LO”
Sampling Rate : 2 Times / Second
Photo Detector : Silicon photo-diode with spectral response filter
Lux Resolution : <1000 : 0.1 ; > 1000 : 1
Temperature Resolution : 0.1
Operating Conditions : -20°C ~ 60°C, -4°F ~ 140°F, 10%RH ~ 90%RH
Storage Conditions : -20°C ~ 60°C, -4°F ~ 140°F, 10%RH ~ 75%RH
Power Supply : 3*1.5V “AAA” batteries
Battery Life : Approximately 60 hours
FEATURES
0 to 2,00,000 Lux / 20,000 Foot Candles
Auto Range Measurement
Measures both Lux and Foot-Candles
High Accuracy
Rapid Response Sampling Time
Temperature Measurement in °C / °F
Color LCD Display with backlight
Over Range Indication
Low Battery Indication
MAX / MIN / DATA HOLD
Enable / Disable auto power off
APPLICATIONS
Beetech B-101 is widely used in/by:
• Photographers
• Researchers
• Students
• Security Department
• Warehouse & Factories
• Art Galleries & Museum & Stadiums
• Hospital
• Educational Institutions & Libraries
• Public places
• Photographers
• Researchers
• Students
• Security Department
• Warehouse & Factories
• Art Galleries & Museum & Stadiums
• Hospital
• Educational Institutions & Libraries
• Public places
SKU: n/a
LINE LASER
BOSCH GLL 5-50X LINE LASER
TECHNICAL DATA
Working range with receiver, value : 50m
Working range : 15m
Working range with receiver : 50m
Accuracy : Horizontal laser line: ± 0.2 mm/m* ; Vertical laser lines: ± 0.3 mm/m* (*plus use-dependent deviation)
Working range, value : 15m
Laser diode : 630 – 650 nm, < 1mW
Operating temperature : -10 – 45 °C
Storage temperature : -20 – 70 °C
Laser class : 2
Working range of laser points, max. : 5m
Self-levelling range : ± 3°
Levelling time : 4s
Power supply : 4 x 1.5 V LR6 (AA)
Operating time (max.) : 24h
Tripod thread : 5/8″
Weight, approx. : 0.5kg
Colour of laser line/plumb points : Red
Plumb point accuracy : ± 0.7 mm/m* (*plus use-dependent deviation)
SKU: n/a
LEAKAGE CLAMP TESTER
Rishabh ALCT 606A Smart Leakag…
SPECIFICATIONS
Leakage Current
Range : 0〜60.00A
Accuracy : ±(1.5%+5)Range : 60.00A〜199.9A
Accuracy : ±(2%+5)
Range : 0〜60.00A
Accuracy : ±(1.5%+5)Range : 60.00A〜199.9A
Accuracy : ±(2%+5)
Range : 200.0A〜300.0A
Accuracy : ±(3%+5)
Range : 300.0A〜600.0A
Accuracy : ±(4%+5)
Resolution : 0.1 mA
Display mode : 4 Digits LCD Display
Clamp Size : 35mm×40mm
Auto Power Off : 5 Minutes
Operating Temperature : -10 to 40 °C
Storage Temperature : -20 to 60° C
Relative humidity : 80% @ -10 °C to 40 °C
Below 70% @ -20 °C to 60°C
Below 70% @ -20 °C to 60°C
Dimensions : 175mm X 70mm X 38mm
LCD Dimension : 32mm X 15mm’
Weight : 120g
FEATURES
Compact size leakage clamp meter
Current measurement from 0.1mA to 600A
Large jaw opening
Data storage facility upto 99 records
Complies with CE, CAT protection
Software facility for reports
SKU: n/a
LCR METER
BEETECH H-530 3 1/2 DIGITS LCR…
SPECIFICATIONS
Capacitance
Range : 2000uF
Accuracy : ± (5%+5)
Resolution : 1uF
Inductance
Range : 20H
Accuracy : ± (0.5%+ 1)
Resolution : 10mH
Resistance
Range : 20M
Accuracy : ± (0.5%+ 1d)
Resolution : 1nF
FEATURES
Display Mode: 3 1/2 LCD display
Maximum Display: 1999
Sampling rate: 3 times/s
Low battery indication & Data Hold
Auto Power Off
9 Volt Battery
SKU: n/a
FUNCTION GENERATOR
BEETECH FG-1601 FUNCTION GENER…
Waveform : Sine, square, triangle and TTL with symmetry
Amplitude : 0 to 0.2V, 2V, 20V Vpp
Sine distortion : < 1%
Frequency range : 1Hz to 1MHz with digital frequency counter
Frequency accuracy : ± 5% of full scale
Output impedance : 50 Ω ± 10%
DC offset : ± 10V
Power : 230V ± 10%, 10VA
Dimensions : 240 (L) x 200 (W) x 85mm (H)
Weight : ≈ 3Kg
FEATURES
Sine wave, triangular wave, square wave and TTL wave outputs.
Low distortion
Minimal sag at frequencies as low as 1Hz
Offset control to shift baseline
SKU: n/a
FORCE GAUGE
HTC FG-20KG Force Gauge
SPECIFICATIONS
Resolution : 0.01 Kg/0.01 LB/0.05 Newton
Min. Display : 0.01 Kg/0.01 LB/0.05 Newton
Accuracy : ± (0.5 % + 2 d), within 23 ± 5C .
Unit select : Kg/LB/Newton
Update time : Fast Approx. 0.2 second, Slow Approx. 0.6 second
Measure Capacity : 20.00 Kg/44.10 LB/196.10 Newton.
Operating Temperature : 0 to 50 ( 32 to 122 ).
Operating Humidity : Less than 80% RH.
SKU: n/a
ELECTRO MAGNETIC FIELD TESTER
HTC EMF-522 Electro Magnetic F…
SPECIFICATIONS
Range : 200/2000mG, 20/200μT
Resolution : 0.1/1mG or 0.01/0.1μT
Frequency Response : 30~300Hz
Sensor : Single Axis
Accuracy : ±(2.5%+6dgt) at 50Hz/60Hz
Sample rate : 2.5 times per second
Operating Temperature & Humidity : 5~40˚C, below 80% RH
Storage Temperature & Humidity : -10~60˚C, below 70% RH
FEATURES
3½ Digits LCD
1,999 Counts
Over Load : LCD display “OL”
Battery Life : Approximate 100 hours
POWER : 9V (6F22) X 1
Standard Accessories : Soft Carrying Case, Manual
Dimension : 130(H) x 56(W) x 38(D)mm
SKU: n/a
EARTH RESISTANCE TESTER
HIOKI FT-6031-50 Earth Tester
SPECIFICATIONS
Measurement System : Two-electrode method/three-electrode method (switchable)
Measurement range / Accuracy :
20 Ω (0 Ω〜20.00 Ω) / ±1.5% rdg ±8 dgt
200 Ω (0 Ω〜200.0 Ω) / ±1.5% rdg ±4 dgt
2000 Ω (0 Ω〜2000 Ω) / ±1.5% rdg ±4 dgt
20 Ω (0 Ω〜20.00 Ω) / ±1.5% rdg ±8 dgt
200 Ω (0 Ω〜200.0 Ω) / ±1.5% rdg ±4 dgt
2000 Ω (0 Ω〜2000 Ω) / ±1.5% rdg ±4 dgt
Earth voltage : 0〜30.0 V rms
Accuracy : ±2.3% rdg ±8 dgt (50 Hz/60 Hz), ±1.3% rdg ±4 dgt (DC)
Accuracy : ±2.3% rdg ±8 dgt (50 Hz/60 Hz), ±1.3% rdg ±4 dgt (DC)
Allowable earth potential : 25.0 V rms (DC or sine wave)
Dustproof and waterproof : IP65/IP67 (EN60529)
Dimensions : 185 mm (7.28 in)W × 111 mm (4.37 in)H × 44 mm (1.73 in)D
Mass : 570 g (20.1 oz.) (including batteries and protector, excluding terminal covers and other accessories)
FEATURES
Easily transfer measurement data to your smartphone or tablet by using our free app GENNECT Cross or to an Excel® file. (Wireless Adapter Z3210 is necessary)
Excellent noise resistance
IP67 protected – top of the industry
Minimize cabling time with innovative earthing rods and cable winder
Wide 0Ω to 2000Ω measurement range
Test all ground types from Class A to Class D with a single meter
SKU: n/a
EARTH RESISTANCE TESTER
CIE DET-2000 Digital Earth Tes…
PECIFICATIONS
Display : 3.5 digits,L.C.D
Accuracy :
0% to 10% of the range…….+3%
10% to 90% of the range……+1.5%
90% to 100% of the range……+3%
0% to 10% of the range…….+3%
10% to 90% of the range……+1.5%
90% to 100% of the range……+3%
H.V Test : 2KV AC For 1 min. Between electrical circuit and containing case
Insulation Resistance Test : More than 25M Ohm at 500V dc between electrical circuit
FEATURES
Rugged ABS Body
0-10 — 1000 Ohm
Easy to use hand held meter
Ni-cd rechargeable cells
Facility as to make bench top type instrument
Four terminals
Designed to measure the resistance of earth used in power circuit
SKU: n/a
Popular Categories this Week
-
PROBES
HIOKI P2000 DC High Voltage Pr…
SPECIFICATIONS
- Maximum Input Voltage : DC 2000 V
- Maximum rated line-to-ground voltage
1000 V (Measurement Category IV), Anticipated transient overvoltage 12000 V
2000 V (Measurement Category III), Anticipated transient overvoltage 15000 V - Input Resistance : 20 MΩ ±5.0% (between INPUT H and INPUT L, when OUTPUT terminal is open)
- Overload Protection :
2200 V DC/2200 V AC (applied for 1 minute) (between INPUT H and INPUT L)
600 V DC/600 V AC (applied for 1 minute) (between OUTPUT H and OUTPUT L) - Output Terminal : 4 mm banana terminal
- Operating Temperature Range : -25°C to 65°C (-13°F to 149°F)
- Operating Humidity Range : −25°C to 40°C (−13°F to 104°F): 80% RH or less (non-condensing)
40°C to 65°C (104°F to 149°F): Linearly reduces from 80% RH or less at 40°C (104°F) to 25% RH or less at 65°C (149°F) (non-condensing) - Storage temperature and humidity range : -30°C to 70°C (-22°F to 158°F) 90% RH or less (non-condensing)
- Standards : EN 61010
- Included Accessories : Connection Cable Set L4943 ×1, Strap with buckle ×2, Strap ×1, Carrying Case C0205 ×1, Instruction Manual ×1, Operating Precautions ×1
FEATURES
- Enables high voltage measurement up to CAT Ⅲ 2000 V
- Safely measure solar installations like the mega-solar without interrupting the grid
- Connects to compatible Hioki clamp meters and digital multimeters (DMMs)
ACCURACY FOR COMPATIBLE INSTRUMENTS
- DT-4261 :
Range 600.0 V: Combined accuracy ±0.5% rdg ±0.2 V
Range 2000 V: Combined accuracy ±0.5% rdg ±5 V - CM4141-50 ; CM4371-50 ; CM4373-50 ; CM4375-50 :
Range 600.0 V: Combined accuracy ±1.0% rdg ±0.3 V
Range 2000 V: Combined accuracy ±1.0% rdg ±3 V - DT-4282 ; DT-4281 :
Range 60.000 V: Combined accuracy ±0.8% rdg ±0.002 V (output rate 1/10)
Range 600.00 V: Combined accuracy ±0.8% rdg ±0.02 V (output rate 1/10) - DT-4252 ; DT-4253 :
Range 60.00 V: Combined accuracy ±1.2% rdg ±0.05 V (output rate 1/10)
Range 600.0 V: Combined accuracy ±1.2% rdg ±0.5 V (output rate 1/10) - DT-4255 ; DT-4256 :
Range 60.00 V: Combined accuracy ±1.2% rdg ±0.03 V (output rate 1/10)
Range 600.0 V: Combined accuracy ±1.2% rdg ±0.3 V (output rate 1/10)
SKU: n/a -
POWER SUPPLY
BEETECH 3005 30V DC REGULATED …
SPECIFICATION
TECHNICAL SPECIFICATION
- Voltage output range : 0 – 30V
- Current output range : 0 – 5A
- Current and voltage display model : A means pointer display, D means LED display
- Display precision Pointer display : ± 2.5%
- Digital display : ± 1% ± 1 word
PARAMETER SPECIFICATION
- Input voltage: AC 220V ± 10% (switch to choose) 50/60Hz
- Operating condition : -10˚C ~ 40˚C, ≤ 90%RH
- Storage condition : -10˚C ~ 40˚C, ≤ 80%RH
- Voltage stability : ≤ 0.01% + 2mV
- Load stability : ≤ 0.01% + 2mV
- Recovery time : ≤ 100µs
- Ripple and noise : ≤ 1mVrms (effective value)
- Temperature coefficient : ≤ 200PPM˚C
FEATURES
- DC Regulated Power Supply is an easy to use, low ripple high regulation precision instrument.
- It is particularly suitable for experimental development and low voltage applications.
- Its unique feature is over load protection, which makes it a safe power source for testing of electronic equipment.
- The power supply’s output is floating i.e., either the positive or negative output is connected to the chasis or ground.
- Thus the power supply may be used as a positive or negative DC source by grounding -ve or +ve terminal respectively.
SKU: n/a -
POWER GUARD
MECO PG 09 20A POWERGUARD
SPECIFICATIONS :
- RMS VOLTAGE : 240V AC (Nominal) (195V ~ 265Vrms)
- RMS CURRENT : (0.110 ~ 20.00) Arms
- ACTIVE POWER : (0.026 ~ 4.800) KW,@240VAC (KW)
- APPARENT POWER : (0.026 ~ 4.800) KVA,@240VAC (KVA)
- REACTIVE POWER : (0.026 ~ 4.800) KVAr,@240VAC (KVAr)
- POWER FACTOR : (0.026 ~ 0.120) KW,(0.120 ~ 4.800) KW
- LINE FREQUENCY : 45.00 ~ 55.00 Hz
- ACTIVE ENERGY : 000000 ~ 999999 KWh
FEATURES :
- Three Pin Socket and Plug Suitable for Indian Socket
- Large Dual Row LCD Display with Backlight and Annunciators
- Memory Retention (KWh, EUT)
- Simple, Easy and Accurate
- Continuous Measurements
- Counts CO2 generated by Electrical Equiptment (0.555kg CO2 is generated by using 1 KWh Energy)
SKU: n/a -
-
pH/EC/TDS/TEMP METER
HM AP-2 AquaPro Water Quality …
HM Digital’s AquaPro series, is a handheld water quality tester which, with a modern design is perfect for today’s tech-savvy and health-conscience consumer. The AquaPro digital water testers are the next generation for today’s modern kitchen.
SKU: n/a -
PH Meter
HANNA HI98107 pHep Waterproof …
Hanna’s HI98107 pHep® pH tester displays readings with 0.1 pH resolution, ±0.1 pH accuracy, and a range from 0.0 to 14.0 pH. This rugged, reliable, ergonomic, pocket-sized tester is designed for use in the lab or fields while keeping things simple with a two-button operation.
- Extractable Cloth Junction to Extend pH Electrode Life
- Has Automatic Temperature Compensation
- For Use in Fresh Water
SKU: n/a -
MULTIMETER
BEETECH B-511 DIGITAL SMART MU…
SPECIFICATIONS
- DC Voltage:
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V - AC Voltage:
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V - DC Current:
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A - AC Current:
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A - Capacitance:
Range: 4 mF
Accuracy: ± 5% + 3 digits
Resolution: 0.001 mF - Frequency:
Range: 400 kHz
Accuracy: ± 1.0% + 3 digits
Resolution: 0.1 kHz - Resistance:
Range: 40 MΩ
Accuracy: ± 2.0% + 5 digits
Resolution: 0.01 MΩ - Temperature:
Operational: -10 ~ 50°C
Working: 0 ~ 40°C
SKU: n/a - DC Voltage:
Headphones
-
PROBES
HIOKI P2000 DC High Voltage Pr…
SPECIFICATIONS
- Maximum Input Voltage : DC 2000 V
- Maximum rated line-to-ground voltage
1000 V (Measurement Category IV), Anticipated transient overvoltage 12000 V
2000 V (Measurement Category III), Anticipated transient overvoltage 15000 V - Input Resistance : 20 MΩ ±5.0% (between INPUT H and INPUT L, when OUTPUT terminal is open)
- Overload Protection :
2200 V DC/2200 V AC (applied for 1 minute) (between INPUT H and INPUT L)
600 V DC/600 V AC (applied for 1 minute) (between OUTPUT H and OUTPUT L) - Output Terminal : 4 mm banana terminal
- Operating Temperature Range : -25°C to 65°C (-13°F to 149°F)
- Operating Humidity Range : −25°C to 40°C (−13°F to 104°F): 80% RH or less (non-condensing)
40°C to 65°C (104°F to 149°F): Linearly reduces from 80% RH or less at 40°C (104°F) to 25% RH or less at 65°C (149°F) (non-condensing) - Storage temperature and humidity range : -30°C to 70°C (-22°F to 158°F) 90% RH or less (non-condensing)
- Standards : EN 61010
- Included Accessories : Connection Cable Set L4943 ×1, Strap with buckle ×2, Strap ×1, Carrying Case C0205 ×1, Instruction Manual ×1, Operating Precautions ×1
FEATURES
- Enables high voltage measurement up to CAT Ⅲ 2000 V
- Safely measure solar installations like the mega-solar without interrupting the grid
- Connects to compatible Hioki clamp meters and digital multimeters (DMMs)
ACCURACY FOR COMPATIBLE INSTRUMENTS
- DT-4261 :
Range 600.0 V: Combined accuracy ±0.5% rdg ±0.2 V
Range 2000 V: Combined accuracy ±0.5% rdg ±5 V - CM4141-50 ; CM4371-50 ; CM4373-50 ; CM4375-50 :
Range 600.0 V: Combined accuracy ±1.0% rdg ±0.3 V
Range 2000 V: Combined accuracy ±1.0% rdg ±3 V - DT-4282 ; DT-4281 :
Range 60.000 V: Combined accuracy ±0.8% rdg ±0.002 V (output rate 1/10)
Range 600.00 V: Combined accuracy ±0.8% rdg ±0.02 V (output rate 1/10) - DT-4252 ; DT-4253 :
Range 60.00 V: Combined accuracy ±1.2% rdg ±0.05 V (output rate 1/10)
Range 600.0 V: Combined accuracy ±1.2% rdg ±0.5 V (output rate 1/10) - DT-4255 ; DT-4256 :
Range 60.00 V: Combined accuracy ±1.2% rdg ±0.03 V (output rate 1/10)
Range 600.0 V: Combined accuracy ±1.2% rdg ±0.3 V (output rate 1/10)
SKU: n/a -
POWER SUPPLY
BEETECH 3005 30V DC REGULATED …
SPECIFICATION
TECHNICAL SPECIFICATION
- Voltage output range : 0 – 30V
- Current output range : 0 – 5A
- Current and voltage display model : A means pointer display, D means LED display
- Display precision Pointer display : ± 2.5%
- Digital display : ± 1% ± 1 word
PARAMETER SPECIFICATION
- Input voltage: AC 220V ± 10% (switch to choose) 50/60Hz
- Operating condition : -10˚C ~ 40˚C, ≤ 90%RH
- Storage condition : -10˚C ~ 40˚C, ≤ 80%RH
- Voltage stability : ≤ 0.01% + 2mV
- Load stability : ≤ 0.01% + 2mV
- Recovery time : ≤ 100µs
- Ripple and noise : ≤ 1mVrms (effective value)
- Temperature coefficient : ≤ 200PPM˚C
FEATURES
- DC Regulated Power Supply is an easy to use, low ripple high regulation precision instrument.
- It is particularly suitable for experimental development and low voltage applications.
- Its unique feature is over load protection, which makes it a safe power source for testing of electronic equipment.
- The power supply’s output is floating i.e., either the positive or negative output is connected to the chasis or ground.
- Thus the power supply may be used as a positive or negative DC source by grounding -ve or +ve terminal respectively.
SKU: n/a -
POWER GUARD
MECO PG 09 20A POWERGUARD
SPECIFICATIONS :
- RMS VOLTAGE : 240V AC (Nominal) (195V ~ 265Vrms)
- RMS CURRENT : (0.110 ~ 20.00) Arms
- ACTIVE POWER : (0.026 ~ 4.800) KW,@240VAC (KW)
- APPARENT POWER : (0.026 ~ 4.800) KVA,@240VAC (KVA)
- REACTIVE POWER : (0.026 ~ 4.800) KVAr,@240VAC (KVAr)
- POWER FACTOR : (0.026 ~ 0.120) KW,(0.120 ~ 4.800) KW
- LINE FREQUENCY : 45.00 ~ 55.00 Hz
- ACTIVE ENERGY : 000000 ~ 999999 KWh
FEATURES :
- Three Pin Socket and Plug Suitable for Indian Socket
- Large Dual Row LCD Display with Backlight and Annunciators
- Memory Retention (KWh, EUT)
- Simple, Easy and Accurate
- Continuous Measurements
- Counts CO2 generated by Electrical Equiptment (0.555kg CO2 is generated by using 1 KWh Energy)
SKU: n/a -
-
pH/EC/TDS/TEMP METER
HM AP-2 AquaPro Water Quality …
HM Digital’s AquaPro series, is a handheld water quality tester which, with a modern design is perfect for today’s tech-savvy and health-conscience consumer. The AquaPro digital water testers are the next generation for today’s modern kitchen.
SKU: n/a -
PH Meter
HANNA HI98107 pHep Waterproof …
Hanna’s HI98107 pHep® pH tester displays readings with 0.1 pH resolution, ±0.1 pH accuracy, and a range from 0.0 to 14.0 pH. This rugged, reliable, ergonomic, pocket-sized tester is designed for use in the lab or fields while keeping things simple with a two-button operation.
- Extractable Cloth Junction to Extend pH Electrode Life
- Has Automatic Temperature Compensation
- For Use in Fresh Water
SKU: n/a
Smartphones & Tablets
-
ALTIMETER
HTC AL-7000 Distance Meter
SPECIFICATIONS
- Measuring Range : 0-5000m/580-1040 hpa
- Resolution : 20m/5hpa
- Operating Temperature : -20~60oC
- Storage Condition : -30~65oC;<90% RH
FEATURES
- Units of measurement : meters (m) /hpa
- Standard Accessories : Neck Strap + Belt Hook
- Dimension : 85(H) x 68(W) x 28(D)mm
- Weight :90g
SKU: n/a -
ALTIMETER
HTC AL-7010 Digital Distance M…
SPECIFICATIONS
- Altimeter : 500~9000 Meters
- Accuracy : 1 meter / feet
- Barometer : 300~1100 hPambar
- Accuracy : 1hPa / mbar (0.01HG)
- Indoor Temp. : -10~60oC
- Accuracy : 0.1oC (0.18oF)
- Humidity : 20~90% Rh
- Accuracy : 1% RH
- Stop Watch : 9hr 59min 59sec.
- Accuracy : 1/10th Sec. Or Sec.
FEATURES
- Altitude history & Graphical Display of the last 12 hour altitude readings.
- Total Altitude Gain & Loss
- Max./Min. Memory for Altimeter and Barometer Pressure
- Barometer Pressure History & Graphical Display
- Electronic barometer Weather Forecast (Sunny, Slightly Cloudy, Cloudy, Small Rain, Large Rain)
- Pressure Trend Indicators
- Perpetual Calendar with day of week
- 12/24 hour selectable
- Low Battery Indication
- Standard Accessories: Handy Belt, Manual, Charging Cord
- Dimension : 177(H) x 98(W) x 39(D)mm
SKU: n/a -
ANALOG INSULATION TESTER
MECO MC 901 ANALOG INSULATION …
SPCIFICTIONS :
- DC VOLTAGE : 100V
- AC VOLTAGE :
- TEMPERATURE : 0 Degree to 50 Degree C
- RANGE : 0-20MOhms
- ACCURACY : +- 5% of Indicated Value at 27 Degree C +- 5 Degree C
- DIMENSIONS : 144.5 x 95 x 72.5 mm (approx.)
- STORAGE TEMPERATURE : -10 Degree C to 60 Degree C
FEATURES :
- Single Person Push Button Operation
- High Accuracy 5% of Indicated Value in Effective Range
SKU: n/a -
ANALOG INSULATION TESTER
MECO MC 903 ANALOG INSULATION …
SPECIFICATIONS :
- TEST VOLTAGE : 500V
- LOAD CAPACITY : 3.5 KV @ 50Hz for 1 min. between Input Terminals & Case
- RANGE : 0-500M Ohms
- Display Type-LED
FEATURES :
- Model Name-Mc 903 M Ohms Analog Insulation Tester
- Brand Color-Yellow
- Primary Functions-Tester
- Type-Digital
SKU: n/a -
ANALOG INSULATION TESTER
MECO MC 904 ANALOG INSULATION …
SPECIFICATIONS :
- OPERATING TEMPERATURE : 0° to 50 °C
- INSULATION RESISTANCE TEST : More than 500 M Ohm at 500V between Circuit and Case
- DIMENSIONS : 144.5 x 95 x 72.5 mm(approx.)
- ACCURACY : High Accuracy ±5% of Indicated Value in Effective Range
FEATURES :
- Single Person Push Button Operation, Terminal voltage>85 % of rated voltage for insulation Resistance
SKU: n/a -
ANALOG INSULATION TESTER
MECO MC 906 ANALOG INSTRUMENT …
SPECIFICATIONS :
- RANGE : 1000V
- RESISTANCE : 0 – 200 M Ohms
- Power : 9V (6 x 1.5V AA) Battery
- DIMENSIONS : 144.5x95x72.5 mm (approx.)
FEATURES :
- Optimum performance
- Single Person Push Button Operation
- 3½ Digit 17mm LCD Display with Backlight
SKU: n/a
Recommendation For You
View All Recommendations-
PROBES
HIOKI P2000 DC High Voltage Pr…
SPECIFICATIONS
- Maximum Input Voltage : DC 2000 V
- Maximum rated line-to-ground voltage
1000 V (Measurement Category IV), Anticipated transient overvoltage 12000 V
2000 V (Measurement Category III), Anticipated transient overvoltage 15000 V - Input Resistance : 20 MΩ ±5.0% (between INPUT H and INPUT L, when OUTPUT terminal is open)
- Overload Protection :
2200 V DC/2200 V AC (applied for 1 minute) (between INPUT H and INPUT L)
600 V DC/600 V AC (applied for 1 minute) (between OUTPUT H and OUTPUT L) - Output Terminal : 4 mm banana terminal
- Operating Temperature Range : -25°C to 65°C (-13°F to 149°F)
- Operating Humidity Range : −25°C to 40°C (−13°F to 104°F): 80% RH or less (non-condensing)
40°C to 65°C (104°F to 149°F): Linearly reduces from 80% RH or less at 40°C (104°F) to 25% RH or less at 65°C (149°F) (non-condensing) - Storage temperature and humidity range : -30°C to 70°C (-22°F to 158°F) 90% RH or less (non-condensing)
- Standards : EN 61010
- Included Accessories : Connection Cable Set L4943 ×1, Strap with buckle ×2, Strap ×1, Carrying Case C0205 ×1, Instruction Manual ×1, Operating Precautions ×1
FEATURES
- Enables high voltage measurement up to CAT Ⅲ 2000 V
- Safely measure solar installations like the mega-solar without interrupting the grid
- Connects to compatible Hioki clamp meters and digital multimeters (DMMs)
ACCURACY FOR COMPATIBLE INSTRUMENTS
- DT-4261 :
Range 600.0 V: Combined accuracy ±0.5% rdg ±0.2 V
Range 2000 V: Combined accuracy ±0.5% rdg ±5 V - CM4141-50 ; CM4371-50 ; CM4373-50 ; CM4375-50 :
Range 600.0 V: Combined accuracy ±1.0% rdg ±0.3 V
Range 2000 V: Combined accuracy ±1.0% rdg ±3 V - DT-4282 ; DT-4281 :
Range 60.000 V: Combined accuracy ±0.8% rdg ±0.002 V (output rate 1/10)
Range 600.00 V: Combined accuracy ±0.8% rdg ±0.02 V (output rate 1/10) - DT-4252 ; DT-4253 :
Range 60.00 V: Combined accuracy ±1.2% rdg ±0.05 V (output rate 1/10)
Range 600.0 V: Combined accuracy ±1.2% rdg ±0.5 V (output rate 1/10) - DT-4255 ; DT-4256 :
Range 60.00 V: Combined accuracy ±1.2% rdg ±0.03 V (output rate 1/10)
Range 600.0 V: Combined accuracy ±1.2% rdg ±0.3 V (output rate 1/10)
SKU: n/a -
POWER SUPPLY
BEETECH 3005 30V DC REGULATED …
SPECIFICATION
TECHNICAL SPECIFICATION
- Voltage output range : 0 – 30V
- Current output range : 0 – 5A
- Current and voltage display model : A means pointer display, D means LED display
- Display precision Pointer display : ± 2.5%
- Digital display : ± 1% ± 1 word
PARAMETER SPECIFICATION
- Input voltage: AC 220V ± 10% (switch to choose) 50/60Hz
- Operating condition : -10˚C ~ 40˚C, ≤ 90%RH
- Storage condition : -10˚C ~ 40˚C, ≤ 80%RH
- Voltage stability : ≤ 0.01% + 2mV
- Load stability : ≤ 0.01% + 2mV
- Recovery time : ≤ 100µs
- Ripple and noise : ≤ 1mVrms (effective value)
- Temperature coefficient : ≤ 200PPM˚C
FEATURES
- DC Regulated Power Supply is an easy to use, low ripple high regulation precision instrument.
- It is particularly suitable for experimental development and low voltage applications.
- Its unique feature is over load protection, which makes it a safe power source for testing of electronic equipment.
- The power supply’s output is floating i.e., either the positive or negative output is connected to the chasis or ground.
- Thus the power supply may be used as a positive or negative DC source by grounding -ve or +ve terminal respectively.
SKU: n/a -
POWER GUARD
MECO PG 09 20A POWERGUARD
SPECIFICATIONS :
- RMS VOLTAGE : 240V AC (Nominal) (195V ~ 265Vrms)
- RMS CURRENT : (0.110 ~ 20.00) Arms
- ACTIVE POWER : (0.026 ~ 4.800) KW,@240VAC (KW)
- APPARENT POWER : (0.026 ~ 4.800) KVA,@240VAC (KVA)
- REACTIVE POWER : (0.026 ~ 4.800) KVAr,@240VAC (KVAr)
- POWER FACTOR : (0.026 ~ 0.120) KW,(0.120 ~ 4.800) KW
- LINE FREQUENCY : 45.00 ~ 55.00 Hz
- ACTIVE ENERGY : 000000 ~ 999999 KWh
FEATURES :
- Three Pin Socket and Plug Suitable for Indian Socket
- Large Dual Row LCD Display with Backlight and Annunciators
- Memory Retention (KWh, EUT)
- Simple, Easy and Accurate
- Continuous Measurements
- Counts CO2 generated by Electrical Equiptment (0.555kg CO2 is generated by using 1 KWh Energy)
SKU: n/a -
-
pH/EC/TDS/TEMP METER
HM AP-2 AquaPro Water Quality …
HM Digital’s AquaPro series, is a handheld water quality tester which, with a modern design is perfect for today’s tech-savvy and health-conscience consumer. The AquaPro digital water testers are the next generation for today’s modern kitchen.
SKU: n/a -
PH Meter
HANNA HI98107 pHep Waterproof …
Hanna’s HI98107 pHep® pH tester displays readings with 0.1 pH resolution, ±0.1 pH accuracy, and a range from 0.0 to 14.0 pH. This rugged, reliable, ergonomic, pocket-sized tester is designed for use in the lab or fields while keeping things simple with a two-button operation.
- Extractable Cloth Junction to Extend pH Electrode Life
- Has Automatic Temperature Compensation
- For Use in Fresh Water
SKU: n/a -
MULTIMETER
BEETECH B-511 DIGITAL SMART MU…
SPECIFICATIONS
- DC Voltage:
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V - AC Voltage:
Range: 600V
Accuracy: ± 1.0% + 5 digits
Resolution: 1.0 V - DC Current:
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A - AC Current:
Range: 10A
Accuracy: ± 2.0% + 10 digits
Resolution: 0.01A - Capacitance:
Range: 4 mF
Accuracy: ± 5% + 3 digits
Resolution: 0.001 mF - Frequency:
Range: 400 kHz
Accuracy: ± 1.0% + 3 digits
Resolution: 0.1 kHz - Resistance:
Range: 40 MΩ
Accuracy: ± 2.0% + 5 digits
Resolution: 0.01 MΩ - Temperature:
Operational: -10 ~ 50°C
Working: 0 ~ 40°C
SKU: n/a - DC Voltage:
-
MOISTURE METER
BEETECH B-M2 Digital Moisture …
SPECIFICATIONS
- Electrode Length : 10 mm
- Electrodes : Replaceable
- Moisture Range : Wood : 5 ~ 70% RH , Building Material : 0.1~2.4% RH
- Temperature Range : -20 ~ 70°C / -4 ~ 122°F
- Moisture Accuracy –
Wood : 5 ~ 30% : ±1%
30 ~ 60% : ±2%
60 ~ 70% : ±4%
Other: ±5% - Temperature Accuracy : -20 ~ 70°C / -4 ~ 158°F : ±1.5°C / 2.7°F
- Auto Power Off : After 120 seconds of inactivity
- Operating Ambient Temperature : 0 ~ 50°C/32~122°F
- Operating Ambient Humidity : 0 ~ 85% RH
- Dimensions : 163 X 62 X 30 mm
- Weight : 153 g
- Accessories : User Manual , 9V Battery, Pouch with Box packing
FEATURES
- Big LCD display with backlight.
- Replaceable electrode pins .
- Various materials measurement.
- Analog bar and digital display values at same time.
- Selectable measurement for wood or other building material.
- Simultaneous measurement of moisture & temperature
SKU: n/a -
METAL DETECTOR
BEETECH BMD-100 METAL DETECTOR
SPECIFICATIONS
Colour indication
- RED – Metal Detection
- GREEN – Power On
- Clear RED – Charge indication
- Sensitivity 0.1gm of any metal with minimum 6mm diameter can detect from 20 mm distance.
FEATURES
- Indication audio buzzer
- Automatic setting
- Inbuilt battery charger
- Light weight with strong ABS Body
- Ultra sensitive with Instant operation
- Search Area: 90 sq.mm
- Detects all types of ferrous and non-ferrous Metal Alloys
- Audio and Visual Indication
- 9 V Rechargeable NI-MN Battery.
- Dimension: 330 (l) X50 (w) X35 (h)
SKU: n/a -
LUX METER
BEETECH B-101 DIGITAL LUX METE…
SPECIFICATIONS
- Display : 4 Digits color LCD display Measuring
- Range : 0 Lux ~ 2,00,000 Lux / 0 Fc ~ 20,000 Fc (Foot Candles)
- Accuracy : ±3% rdg ± 8d (<10,000 Lux) ; ± 4% rdg ± 10d (>10,000 Lux)
- Temperature Range : -20 ~ 70°C / 4°F ~ 158°F |
- Temperature Accuracy : ±1.5°C / 2.7°F
- Spectral Response : CIE photopic (CIE Human Eye Response Curve)
- Spectral Accuracy : CIE Vλ function (f1’ ≤ 6% f2’ ≤ 2%)
- Over Range Indication : LCD Display “-OL-” or “-LO”
- Sampling Rate : 2 Times / Second
- Photo Detector : Silicon photo-diode with spectral response filter
- Lux Resolution : <1000 : 0.1 ; > 1000 : 1
- Temperature Resolution : 0.1
- Operating Conditions : -20°C ~ 60°C, -4°F ~ 140°F, 10%RH ~ 90%RH
- Storage Conditions : -20°C ~ 60°C, -4°F ~ 140°F, 10%RH ~ 75%RH
- Power Supply : 3*1.5V “AAA” batteries
- Battery Life : Approximately 60 hours
FEATURES
- 0 to 2,00,000 Lux / 20,000 Foot Candles
- Auto Range Measurement
- Measures both Lux and Foot-Candles
- High Accuracy
- Rapid Response Sampling Time
- Temperature Measurement in °C / °F
- Color LCD Display with backlight
- Over Range Indication
- Low Battery Indication
- MAX / MIN / DATA HOLD
- Enable / Disable auto power off
APPLICATIONS
- Beetech B-101 is widely used in/by:
• Photographers
• Researchers
• Students
• Security Department
• Warehouse & Factories
• Art Galleries & Museum & Stadiums
• Hospital
• Educational Institutions & Libraries
• Public places
SKU: n/a